Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://www.ducatittandf1.com/ |
|
Bearing for using Paso and 750 Sport triple clamps in Pantah http://www.ducatittandf1.com/viewtopic.php?f=10&t=10819 |
Page 1 of 1 |
Author: | 618F1 [ Sat Mar 29, 2014 12:53 pm ] |
Post subject: | Bearing for using Paso and 750 Sport triple clamps in Pantah |
This is not really from me, it is from Gary Patton, but I have confirmed that this is a correct bearing to use when putting a Paso, 750 Sport, and/or a few other odd triple clamps that have 25mm stems (at the bearings inner) in a Pantah/TT/F1 frame. It is Timken 30205M 9/KM1. There are some similar (older) numbers for the last five figures, but it is the 30205M that matters; it has a 52mm race OD and a 25mm bearing ID. MikeV Attachment: Attachment:
|
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |