DUCATI TT and F1 FORUM
 
It is currently Tue Mar 19, 2024 12:57 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Piston-Rings for 80mm Bore-Diam. (Forged E Pistons)
PostPosted: Wed Dec 28, 2011 12:11 pm 
Offline

Joined: Fri Nov 19, 2010 6:17 pm
Posts: 7
Location: Aachen Germany
Good evening!

Over christmas I have stripped my 600cc TT2 engine due to problems with some oil blows in the exhaust gas. I found out that the second compression ring of the rear cylinder was broken.The pistons are AE type forged HC pistons with 80mm bore (500cc pantah engine bored out to approx. 600cc).

Now, due to the fact that the engine was rebuild not too long ago and everything else looks pretty well, - I bought the road legal Maltry TT2 some while ago -, I would like just to replace the ring (s) !!

Is there anyone who can tell me a supplier to buy ring sets or even sell me some???
Until now I wasn´t succesful in Germany.The ring thickness is 1,68mm.

Thank you very much for iany information and help.

Best regards

Hein


Top
 Profile  
 
 Post subject: Re: Piston-Rings for 80mm Bore-Diam. (Forged E Pistons)
PostPosted: Wed Dec 28, 2011 4:04 pm 
Offline

Joined: Thu Dec 02, 2010 3:26 pm
Posts: 6
Location: Munich Germany
hello Hein

try this one http://www.lesegmentab.com/fr/pour-nous-contacter.html

It was recommended on a french forum, but I have no personal experience.

kind regards
herb


Top
 Profile  
 
 Post subject: Re: Piston-Rings for 80mm Bore-Diam. (Forged E Pistons)
PostPosted: Mon Jan 02, 2012 5:21 am 
Offline

Joined: Mon Oct 18, 2010 12:54 pm
Posts: 88
Images: 1
Location: Philippines, Western Pacific
Hiya Hein,


I noticed this today:

http://www.ebay.co.uk/itm/DUCATI-MONSTE ... 579wt_1292

you would however be advised to ask the seller about bore size and ring dimensions before bidding......... ;)



Poison


Top
 Profile Personal album  
 
 Post subject: Re: Piston-Rings for 80mm Bore-Diam. (Forged E Pistons)
PostPosted: Mon Jan 02, 2012 2:59 pm 
Offline

Joined: Fri Nov 19, 2010 6:17 pm
Posts: 7
Location: Aachen Germany
Hi Poison, thanks very much for the hint and the link.
I will try to find to find out.

Best regards to you

Hein


Top
 Profile  
 
 Post subject: Re: Piston-Rings for 80mm Bore-Diam. (Forged E Pistons)
PostPosted: Sat Jan 07, 2012 9:04 am 
Offline
User avatar

Joined: Sun Aug 08, 2010 4:37 pm
Posts: 362
Images: 6
Location: Ottawa, Ontario, The Great White North
Hello Hein:

We've got some stock (AE) Pantah 600 rings on the store at http://www.loudbikestore.com/066147493-piston-ring-set-80mm-ducati-2v-belt-drive-twins-600-pantah-p-14150.html. If you can give me some measurements off your existing rings, I'll check to see if they might fit..

Regards,

_________________
Steve Munro
Montreal, QC CANADA


Top
 Profile Personal album  
 
 Post subject: Re: Piston-Rings for 80mm Bore-Diam. (Forged E Pistons)
PostPosted: Sat Jan 07, 2012 5:54 pm 
Offline

Joined: Fri Nov 19, 2010 6:17 pm
Posts: 7
Location: Aachen Germany
Hi Steve, hi TT2 fans!

Thank you for the replies on my request. Meanwhile the problem is solved, I could replace the scnd. ring by a ring of a BMW car engine.

Thank you for the support - the issue is closed.

Hein


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Template made by DEVPPL
[ Time : 0.036s | 15 Queries | GZIP : Off ]