Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://www.ducatittandf1.com/ |
|
Fuel fillers from Europlast http://www.ducatittandf1.com/viewtopic.php?f=10&t=1842 |
Page 1 of 1 |
Author: | 618F1 [ Thu Feb 16, 2012 7:26 pm ] |
Post subject: | Fuel fillers from Europlast |
I recently ordered an F1/Endurance fiberglass tank from this fine company in Italy. It fits well, and has the right profile. To go with it I got these neat fuel filler parts. The simple spin-on cap and the quick-filler/fuel break style both fit on the same ring, and can easily be switched. In addition, the size and pattern of the bolts is same as the common Newton cap so often used; thus, if you need this style you can make the conversion easily. MikeV http://www.europlastsucci.com/ Attachment: Attachment:
|
Author: | geo7863 [ Fri Feb 17, 2012 5:56 am ] |
Post subject: | Re: Fuel fillers from Europlast |
They look pretty good Mike...is there a website for Europlast... I put it in the German version of google and all I get are German companies! doh!.......... I can see the website address on the caps in the photos |
Author: | kineteks [ Tue Mar 06, 2012 5:06 pm ] |
Post subject: | Re: Fuel fillers from Europlast |
The Newton cap is a 120mm flange w/ 8 bolt 4" bolt-circle correct? What size FH screws does it use? |
Author: | Carlo [ Tue Mar 06, 2012 5:15 pm ] |
Post subject: | Re: Fuel fillers from Europlast |
Hello Friends, if you need to ask something EUROPLAST, I am a good friend, I will build the tanks and fairings of my project MORETTI replication, the company EUROPLAST. You explained to me what I must tell EUROPLAST. I hope you understand my message. Jesus Christ bless those who invented the simultaneous translator. Carlo Leoncini. I'm not shocked, I like the little face. |
Author: | 618F1 [ Tue Mar 06, 2012 7:35 pm ] |
Post subject: | Re: Fuel fillers from Europlast |
As I said, everything is a bolt on. Same. MikeV |
Author: | la tige [ Wed Mar 07, 2012 2:15 am ] |
Post subject: | Re: Fuel fillers from Europlast |
website: http://www.europlastsucci.com/tappi.asp I can confirm, pretty good quality, very symphatic prices, and wide choice... ( let me tell you they don't pay for that.. ) my ex pantah was equipped with NCR fuel tank from europlast Attachment:
|
Author: | 618F1 [ Fri Mar 09, 2012 1:37 pm ] |
Post subject: | Re: Fuel fillers from Europlast |
5mm - .75mm fine threads if the tank has tapped threads attached. 5mm x whatever thread if it simply has holes in it. Both about 10mm long. You have to have hands like a heart surgeon to hold the nuts inside the tank opening if the tank is not threaded. MikeV Nice clean Pantah, la tige. You even got in some French blue didn't you? MikeV |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |