Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://www.ducatittandf1.com/ |
|
Ceriani fork maintenance http://www.ducatittandf1.com/viewtopic.php?f=10&t=2122 |
Page 1 of 1 |
Author: | pantah_good [ Mon Mar 26, 2012 8:02 pm ] |
Post subject: | Re: Ceriani fork maintenance |
Hi Sean, I'll bet a buck your forks use the same parts to rebuild the adjusters as the forks on the F1B, as described in the "Forcella Italia Fork Rebuild" thread: http://www.ducatittandf1.com/viewtopic.php?f=24&t=1657&p=3344#p3344. I edited my post in that thread to include the page from the parts manual, so you could see what the part numbers are referring to. Another old racing tip (normally used for external oil lines) not mentioned there, is to put a thin coat of blue locktite on both sides of the crush washers at assembly. Bill |
Author: | customheadf1750 [ Tue Mar 27, 2012 1:58 am ] |
Post subject: | Re: Ceriani fork maintenance |
Thanks Bill, I had seen that post but I didnt think the parts would be shared but now it seems obvious. I will check it out and report back. Thanks for that, Sean |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |