Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum
http://www.ducatittandf1.com/

Ally-Pully !!!
http://www.ducatittandf1.com/viewtopic.php?f=10&t=2279		 Page 1 of 2
Author:  Poison [ Sun Apr 08, 2012 11:49 am ]
Post subject:  Ally-Pully !!!
I am still (yawn.......) in the process of stripping-down my donor Pantah 600SL into manageable chunks for transportation to the Philippine Isalnds prior to assembling same into one of the most lightweight TT2s the world has ever seen.
Presently, however, I have removed the rear camshaft pulley, prior to getting at the rear heads, but SURPRISE! SURPRISE! that rear pulley is HEAVY AND magnetic! I am sure that my previous Pantah had aluminium camshaft pulleys....................or am I dreaming?
Please let me know, as I'm worried that excess of Anno Domini is finally :lol: causing Your Author to loose his marbles......................... :roll: :roll: :roll:

:shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock:
Author:  graeme [ Sun Apr 08, 2012 5:28 pm ]
Post subject:  Re: Ally-Pully !!!
The first 500's had Aluminium square tooth pulleys, but I'm not sure when they were replaced with steel.
Author:  Poison [ Tue Apr 10, 2012 9:17 am ]
Post subject:  Re: Ally-Pully !!!
Thanks for that Graeme! At least I know that I'm not going completely bananas! :lol: :lol: :lol:

I think that as a solution to my problemette, I will convert to the round-tooth Monster belts. It seems that the
Pantah-type square-tooth belts are not so easy to come by anyway................. :shock: :shock: :shock:
Author:  pat slinn [ Tue Apr 10, 2012 11:47 am ]
Post subject:  Re: Ally-Pully !!!
I am not sure either when round tooth steel pulleys were made available, during the 1985/6 season I do know of at least a couple of bikes that had big problems when they were fitted with round tooth belts on square pulleys !. These belts were supplied by a un-official UK Ducati spares agent, he claims that he bought his belts from a Ducati dealer in Bologna.
Author:  Carlo [ Tue Apr 10, 2012 4:27 pm ]
Post subject:  Re: Ally-Pully !!!
I'm sorry friends, I might have realized that you're looking for timing belts for distribution? With square teeth?

I use this brand, I've never had problems, and are cheap in price.

Sorry if I gave the wrong answer.

I like to talk with you.

Must you be patient, I have a lot of patience, I have 4 women in the house. HELP! :lol:

Ciao a tutti !!!! carlo

Attachments:
immagine 161.jpg
immagine 161.jpg [ 2.77 MiB | Viewed 2042 times ]
Author:  pat slinn [ Tue Apr 10, 2012 5:35 pm ]
Post subject:  Re: Ally-Pully !!!
hello Carlo,

Do you need rescuing !

Ciao,

Pat.
Author:  618F1 [ Tue Apr 10, 2012 7:07 pm ]
Post subject:  Re: Ally-Pully !!!
Didn't the Pantah start out with these plastic/aluminum pulleys? MikeV
Attachment:
cam cogs plastic Pantah 500.jpg
cam cogs plastic Pantah 500.jpg [ 26.48 KiB | Viewed 2026 times ]
Author:  pat slinn [ Wed Apr 11, 2012 8:19 am ]
Post subject:  Re: Ally-Pully !!!
I have just looked at my 1981 500SL Pantah workshop manual. The photographs show Alloy pulleys, I can remember being told by the Ducati race shop only to use Alloy ones. I believe that the production TT one's & two's came with Alloy ones. I do know that on one or two plastic pulleys the Alloy inserted centre part came loose. Pat.
Author:  roli57 [ Wed Apr 11, 2012 5:37 pm ]
Post subject:  Re: Ally-Pully !!!
Hy @ all,

these are the original ally-pullys of my 1981 Ducati Pantah, but you can't buy it today, I think :-(


But Carlo has wonderfull Alloy-Pullys..... :-)

regards Rolf




sorry for my bad language

Attachments:
Dsc_0460.jpg
Dsc_0460.jpg [ 354.5 KiB | Viewed 1968 times ]
Author:  Carlo [ Thu Apr 12, 2012 5:42 pm ]
Post subject:  Re: Ally-Pully !!!
Friends I'm back! I want you to see my Ducati Pantah engine block that I purchased some time ago by a friend of mine who had bought him at Ducati as a replacement part.

The engine is new, there is a sheet of testing with the date 1986.

You read.

I do not know if this is interesting, the engine block is very beautiful, there are still small caps in the intake and exhaust.

Hello Friends.

Attachments:
immagine 162.jpg
immagine 162.jpg [ 2.57 MiB | Viewed 1924 times ]
immagine 163.jpg
immagine 163.jpg [ 2.75 MiB | Viewed 1924 times ]
immagine 164.jpg
immagine 164.jpg [ 2.75 MiB | Viewed 1924 times ]
immagine 165.jpg
immagine 165.jpg [ 2.77 MiB | Viewed 1924 times ]
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/