Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://www.ducatittandf1.com/ |
|
Bitsa in the guise of a TT2 http://www.ducatittandf1.com/viewtopic.php?f=10&t=256 |
Page 9 of 10 |
Author: | 618F1 [ Wed Jun 28, 2017 3:01 pm ] |
Post subject: | Re: Bitsa in the guise of a TT2 |
Hello Sam. Do you mean the brackets welded to the frame to hold the aluminum frame plates? Is that what you need? MikeV |
Author: | Sam [ Wed Jun 28, 2017 3:23 pm ] |
Post subject: | Re: Bitsa in the guise of a TT2 |
Yes Mike correct, as far as I can see from pics there is one roughly half way down the diagonal tube from the steering head to front engine mount and another maybe up a third from the rear engine mount, not sure about the front side mounts though. If I remember correctly ive seen two bosses welded just in front of the fuel tank, is that a mount for the fairing as well ? do you have a pic of the front stay/support from the head stock ? Lastly what size of alloy flat bar is used for the stays. Thank you in advance Sam |
Author: | 618F1 [ Thu Jun 29, 2017 1:15 am ] |
Post subject: | Re: Bitsa in the guise of a TT2 |
OK. Give us a few days. Somewhere on here are the dimensions of the TT2 fairings stays. Try the search button and see what you can find there in the meantime. MikeV |
Author: | Sam [ Thu Jun 29, 2017 2:14 am ] |
Post subject: | Re: Bitsa in the guise of a TT2 |
618F1 wrote: OK. Give us a few days. Somewhere on here are the dimensions of the TT2 fairings stays. Try the search button and see what you can find there in the meantime. MikeV Cheers Mike, I did try and do a search but brought up all sorts, maybe using the incorrect wording. Sam |
Author: | Sam [ Thu Jun 29, 2017 12:51 pm ] |
Post subject: | Re: Bitsa in the guise of a TT2 |
Hi Mike, I found the drawings of the brackets cheers ! next what thickness and width of ally is used ? |
Author: | Sam [ Sat Jul 01, 2017 12:07 pm ] |
Post subject: | Re: Bitsa in the guise of a TT2 |
Electronic bling arrived this morning micro switch gear electronic rev counter / speedo and M-unit blue. https://youtu.be/dmexjVEZ2q8 Attachment:
|
Author: | ducttf1 [ Sat Jul 01, 2017 12:20 pm ] |
Post subject: | Re: Bitsa in the guise of a TT2 |
That Moto Gadget stuff is top quality! Have fun! Lou |
Author: | 618F1 [ Sat Jul 01, 2017 12:43 pm ] |
Post subject: | Re: Bitsa in the guise of a TT2 |
What are the two small aluminum rings with wires on them used for? What is this I see here? MikeV |
Author: | Sam [ Sat Jul 01, 2017 1:11 pm ] |
Post subject: | Re: Bitsa in the guise of a TT2 |
I shall be using the bike on the twisty back roads of Scotland so need lights and indicators. |
Page 9 of 10 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |