Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum
http://www.ducatittandf1.com/

Bitsa in the guise of a TT2
http://www.ducatittandf1.com/viewtopic.php?f=10&t=256		 Page 10 of 10
Author:  Cal [ Sat Oct 21, 2017 10:11 am ]
Post subject:  Re: Bitsa in the guise of a TT2
NICE.....maybe even the centerpiece on the dining room table!!
Author:  Sam [ Tue Oct 24, 2017 4:49 am ]
Post subject:  Re: Bitsa in the guise of a TT2
I made a floating caliper last night using a SS caliper mount and removing the stay,

Image

I turned up a dowel to mount the caliper bracket to so it was all running true to the spindle center then machined the boss allowing me to hold that in the chuck and machine from the other side.

Image

Image

Once this was opened out I fitted a oilite bush and faced up the inner side for the one half of a top hat spacer

Image

Image

Quick and easy solution, I need to mount the swing arm and then measure the outer spacer which shall be slightly longer than the boss allowing the mount to rotate.

Image
Author:  Sam [ Wed Oct 25, 2017 2:31 am ]
Post subject:  Re: Bitsa in the guise of a TT2
Hi MikeV can you see these?

Attachments:
20171024_090418.jpg
20171024_090418.jpg [ 2.11 MiB | Viewed 817 times ]
20171023_191108.jpg
20171023_191108.jpg [ 2.33 MiB | Viewed 817 times ]
20171023_181454.jpg
20171023_181454.jpg [ 2.11 MiB | Viewed 817 times ]
20171023_121435.jpg
20171023_121435.jpg [ 2.1 MiB | Viewed 817 times ]
Author:  618F1 [ Wed Oct 25, 2017 10:48 am ]
Post subject:  Re: Bitsa in the guise of a TT2
Perfect! Thank you. MikeV

Interesting way to chuck up that part. Have thought about a few things like that, but was afraid to do it. Will give it a go.
Page 10 of 10 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/