Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://www.ducatittandf1.com/ |
|
M1r http://www.ducatittandf1.com/viewtopic.php?f=10&t=257 |
Page 1 of 2 |
Author: | TT1-F1 [ Thu Jun 23, 2011 3:23 pm ] |
Post subject: | M1r |
Wich offset are your M1r's yokes ? We now have 3 and none is the same, I am looking for the right one for the TT1-F1. Now there is an altered Paso yoke in but it seems very short. Jarno |
Author: | littlemono82 [ Mon Jun 27, 2011 1:28 pm ] |
Post subject: | Re: M1r |
Hallo Jarno, It all depends on what kind of wheels your going to run? Groet remco |
Author: | TT1-F1 [ Sat Jul 02, 2011 8:11 am ] |
Post subject: | Re: M1r |
Remco I am running 17 " wheels front and rear. Jarno |
Author: | Dick le Dog [ Sat Jul 02, 2011 8:34 am ] |
Post subject: | Re: M1r |
Offset, off-set or off set is a big thing with me, because Paso yokes, triple trees etc are not , in my opinion, compatible for competition machines. Use anything with at least 25mm off-set. This is only my opinion after comparison, and I am interested to hear any comment. |
Author: | Dick le Dog [ Sat Jul 02, 2011 8:47 am ] |
Post subject: | Re: M1r |
[These are harris adjustable yokes, and are at 30mm off-set for interest Attachment: Below , another to show eccentric adjuster: Attachment:
|
Author: | TT1-F1 [ Sat Jul 02, 2011 3:07 pm ] |
Post subject: | Re: M1r |
I will get the ruler on top of them monday! But I can see that you can make the harris item a lot shorter then 30 mm? Jarno |
Author: | littlemono82 [ Sun Jul 03, 2011 9:50 am ] |
Post subject: | Re: M1r |
Jarno, You need to know the wheel size, offset and headstock angle you are going to use. Then put your numbers in this free software: Go to www.tonyfoale.com Push botton Freeware and download:steering geometry calculator Play with the yoke off set numbers and you can see what you have Ps: you need at least 90mm of trail, 90-95mm is for very sharp steering and not so stable on the bumpy stuff and 95-100mm is for sharp steering and stable riding. Veel plezier Remco |
Author: | TT1-F1 [ Sat Jul 09, 2011 1:59 pm ] |
Post subject: | Re: M1r |
Nice calculator, The yokes are 25 mm for Paso and 30 for 851, I am waiting on a Bimota one too, it should arrive on monday! Jarno |
Author: | TT1-F1 [ Tue Jul 12, 2011 2:30 pm ] |
Post subject: | Re: M1r |
I received the forks today, they are longer and the off-set is 45mm! I think they must be paso 906? Jarno |
Author: | nojapanbike [ Tue Jul 12, 2011 3:09 pm ] |
Post subject: | Re: M1r |
TT1-F1 wrote: I received the forks today, they are longer and the off-set is 45mm! I think they must be paso 906? Jarno Moto Guzzi sport 1100 carb?? http://www.flickr.com/photos/30416042@N ... /lightbox/ http://micapeak.com/DPG/moto_guzzi/1100 ... -naked.jpg |
Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |