Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum
http://www.ducatittandf1.com/

Brembo calipers
http://www.ducatittandf1.com/viewtopic.php?f=10&t=4643
Page 3 of 3

Author:  CrankyRoller [ Thu Sep 20, 2012 8:51 am ]
Post subject:  Re: Brembo calipers

Hi Ducfan Yes the 15mm master was the biggest period correct unit available in standard trim. A remote reservoir "racing" version of this round top was available in 17 mm which suits those calipers. It offers better feel at the lever. Im sure those masters are hard to find so I suggets taking a 15 mm and boring it to take the 17 mm piston. End result is correct look and good feel.
-Cranky-

Author:  littlemono82 [ Thu Sep 20, 2012 12:09 pm ]
Post subject:  Re: Brembo calipers

Hallo Ducfan,

I have an Excel docu with brake pump against caliper size, this gives a nice indication what to use for good brake feeling etc. But the website will not let me post it, so if you are intersted send me an emailadress and i will send you copy of this file.

Cheers Remco

Author:  pantah_good [ Fri Sep 21, 2012 1:09 pm ]
Post subject:  Re: Brembo calipers

Michael of Vintage Brake has a chart on his website that is very helpful figuring that out. It has worked well for me several times.
Bill
http://www.vintagebrake.com/mastercylinder.htm

Author:  Ducfan [ Mon Sep 24, 2012 11:45 pm ]
Post subject:  Re: Brembo calipers

Thanks again to all who responded especially Cranky with the advise to bore out the m/cylinder.
Cranky, any idea when the seals will be available?
Bruce

Author:  Carlo [ Tue Sep 25, 2012 2:52 am ]
Post subject:  Re: Brembo calipers

I do not know if I understood your question.
The kit to regenerate the 4-piston calipers is located very well, is that of small series brembo.

Sorry if I did not understand your question.

Attachments:
immagine 089.jpg
immagine 089.jpg [ 2.77 MiB | Viewed 1252 times ]

Author:  ducttf1 [ Tue Sep 25, 2012 10:40 am ]
Post subject:  Re: Brembo calipers

Hi Carlo, what is the number of that rebuild kit, or what is it from? By the way we missed you at the Symposium and the Forum. Lou

Author:  Carlo [ Tue Sep 25, 2012 4:50 pm ]
Post subject:  Re: Brembo calipers

Hello Lou, is the kit revision calipers series of small brake calipers tt2, the ones with the brake pads with a hole only.

I was at the symposium, you look at the picture that we took Cranki Roller! :lol: :lol: :lol:

Author:  ducttf1 [ Tue Sep 25, 2012 9:21 pm ]
Post subject:  Re: Brembo calipers

Hi Carlo, oh yeah I forgot! FO5 seals? Lou

Author:  Carlo [ Wed Sep 26, 2012 5:40 am ]
Post subject:  Re: Brembo calipers

Brembo n° KIT-----120279910


ciao lou.

Attachments:
Immagine 249.jpg
Immagine 249.jpg [ 115.27 KiB | Viewed 1193 times ]

Page 3 of 3 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/