Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum
http://www.ducatittandf1.com/

TT1,TT2 shock absorver
http://www.ducatittandf1.com/viewtopic.php?f=10&t=802
Page 1 of 1

Author:  750TT [ Tue Oct 04, 2011 3:18 am ]
Post subject:  TT1,TT2 shock absorver

The length of the rear shock absorber is equal in a F1, TT1, TT2???? :?:

Author:  graeme [ Tue Oct 04, 2011 3:23 am ]
Post subject:  Re: TT1,TT2 shock absorver

Hello, that depends on what swing arm and what engine.

As I found out it's best to measure each allowing for the correct geometry.

graeme

Author:  750TT [ Tue Oct 04, 2011 5:02 am ]
Post subject:  Re: TT1,TT2 shock absorver

graeme wrote:
Hello, that depends on what swing arm and what engine.

As I found out it's best to measure each allowing for the correct geometry.

graeme


Hi Grame.
important detail...
in this occasion it would be a engine 650 and steel swingarm F1. :?:

Author:  la tige [ Wed Oct 05, 2011 3:29 pm ]
Post subject:  Re: TT1,TT2 shock absorver

305 mm eye to eye, with a steel swingarm on my F1

Author:  750TT [ Thu Oct 06, 2011 10:59 am ]
Post subject:  Re: TT1,TT2 shock absorver

la tige wrote:
305 mm eye to eye, with a steel swingarm on my F1


Hi "la tige".

Frame??..

Author:  la tige [ Thu Oct 06, 2011 1:51 pm ]
Post subject:  Re: TT1,TT2 shock absorver

750 F1 frame

Ciao
Philippe

Author:  750TT [ Thu Oct 06, 2011 2:58 pm ]
Post subject:  Re: TT1,TT2 shock absorver

ok,Philippe.Thanks

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/