Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum
http://www.ducatittandf1.com/

FRAMES MORETTI LIMITED EDITION
http://www.ducatittandf1.com/viewtopic.php?f=10&t=928
Page 3 of 8

Author:  Carlo [ Fri Dec 09, 2011 6:03 am ]
Post subject:  Re: FRAMES MORETTI LIMITED EDITION

Hello guys, help .. help, now I will try to answer all of you.

When you do me the questions, you must write to me as if I were an idiot child.

Subject, action and complement.

Example: I speak Italian.

I: subject

I speak: Action

Italian: complement

I am too stupid to learn English.

I seem to have realized that, you ask me how I welded frames Moretti.
The frames are TIG welded.

The price of the frames, will be done when they are ready all the resin parts.

I am replying, 6 tanks, 6 seats, 6 bottoms, all numbered.

Sorry for my English, I am working as a contest of endurance, to respond to your messages.

Long live the simultaneous translator. :lol: Carlo :oops:

Author:  pat slinn [ Sat Dec 10, 2011 1:25 pm ]
Post subject:  Re: FRAMES MORETTI LIMITED EDITION

Hi Carlo,

A master in tubeology, poetry in tube. Let's get Ed Milch to write a poem about bending tube !

My very best regards.

Pat.

Author:  fmcd92 [ Sun Dec 11, 2011 1:56 pm ]
Post subject:  Re: FRAMES MORETTI LIMITED EDITION

Ciao Carlo,

How much do these beautiful frames weigh?

Thank you for your story with those excellent and interesting pictures!

Francis McDermott

Author:  Carlo [ Sun Dec 11, 2011 5:32 pm ]
Post subject:  Re: FRAMES MORETTI LIMITED EDITION

Hello Guys, thanks to my great friend Pat, her compliments make me feel comfortable, because Pat has a great experience, and this is very good for me.

Greetings also to his friend Francis.

I do tomorrow, or at most tomorrow, I will go to Leghorn, to see the first frame completed. My interest will weigh everything.

As soon as I can, I will put more photos.

Tuesday or Wednesday, I'm going to see, how is the production of resins, (tank, seat, fairing) I will put the photos.

I regret not having yet said, the price of this kit.

I do not want to be a man of mystery.

I am a craftsman, who tries to replicate a small production of frames.

If I were to calculate the time that I need to make this type of project, the price would be very high.

I do not calculate all the time I need, because I, am impressed by the passion to achieve that vision.
I do a lot of work, after I've already been working in my shop all day.
I will also try to maintain a reasonable price.

I believe that the kit, it will cost a little money, because there are many components, which are made only to be mounted together on this project.

All kits include: frame, swingarm complete with progressive linkage, tank, seat, lower fairing, windshield, plexiglass.

I think it will also provide the platforms, the elastic fastening, and I do not know yet what I will do exactly.

Thank you all for your interest in my project. CARLO

Attachments:
immagine 038.jpg
immagine 038.jpg [ 2.82 MiB | Viewed 2210 times ]

Author:  Carlo [ Thu Dec 15, 2011 4:57 pm ]
Post subject:  Re: FRAMES MORETTI LIMITED EDITION

Hello guys, as I promised, I'll show more photos of my project.

We have made molds, to replicate the resin parts, full fairing, and seat back.

We're working on the project, the tank mold.

We will do a piece of cloth to put under the layer of resin, with the inscription:

Reply moretti 001/010.

We will do the same with all the components of this limited series.

If you have questions to ask, I am at your disposal.

Soon as I can I will let you know the price of the kit.

Ciao dall'Italia Carlo Leoncini

Attachments:
immagine 105 (2).jpg
immagine 105 (2).jpg [ 115.23 KiB | Viewed 2152 times ]
immagine 104.jpg
immagine 104.jpg [ 118.11 KiB | Viewed 2152 times ]
immagine 103.jpg
immagine 103.jpg [ 120.83 KiB | Viewed 2152 times ]
immagine 102.jpg
immagine 102.jpg [ 119.5 KiB | Viewed 2152 times ]
immagine 099.jpg
immagine 099.jpg [ 112.17 KiB | Viewed 2152 times ]
immagine 098.jpg
immagine 098.jpg [ 123.5 KiB | Viewed 2152 times ]
immagine 096.jpg
immagine 096.jpg [ 78.15 KiB | Viewed 2152 times ]
immagine 095.jpg
immagine 095.jpg [ 97.59 KiB | Viewed 2152 times ]

Author:  nojapanbike [ Thu Dec 15, 2011 5:20 pm ]
Post subject:  Re: FRAMES MORETTI LIMITED EDITION

fairing by Succi??

Author:  Carlo [ Thu Dec 15, 2011 5:31 pm ]
Post subject:  Re: FRAMES MORETTI LIMITED EDITION

Hello, I did make the molds, to my dear friend, Giampaolo Succi.
The hulls, and the rest will be made ​​with a layer of gauze, very thin.

Ciao Carlo.

Author:  Carlo [ Wed Dec 28, 2011 8:12 am ]
Post subject:  Re: FRAMES MORETTI LIMITED EDITION

Hello guys, the first frame is already ready to be listed as the first made​​.
I tried to assemble the parts in an engine case and everything is going ok.

Now the number plate will pay TIG, and I have already ordered the roll cages to be mounted on the progressive linkage damper.

I already ordered the absorber rods for unibol, and also for the rear brake bar collet.

We put some photos.

Hello, Charles Leoncini.

Attachments:
immagine 107 (2).jpg
immagine 107 (2).jpg [ 196.04 KiB | Viewed 2110 times ]
immagine 108 (2).jpg
immagine 108 (2).jpg [ 127.9 KiB | Viewed 2110 times ]
immagine 109 (2).jpg
immagine 109 (2).jpg [ 83.03 KiB | Viewed 2110 times ]
File comment: accommodation has been made ​​on the milling machine in order to make the seat of the roller bearing after the frame has been welded.

Of course, the steering column has been done before smaller, in order to do this.

Of course you all know that when joining a spherical surface welding tends to pull the welded part and ovality.

All this was done to make a perfectly round surface, you can put inside the bearing without problems.

Sorry for my English.

immagine 110 (2).jpg
immagine 110 (2).jpg [ 97.16 KiB | Viewed 2110 times ]
immagine 111 (2).jpg
immagine 111 (2).jpg [ 138.63 KiB | Viewed 2110 times ]

Author:  Carlo [ Fri Feb 10, 2012 5:41 pm ]
Post subject:  Re: FRAMES MORETTI LIMITED EDITION

Hello everyone, my project REPLICA FRAME MORETTI, went on very slowly, in Italy we have a very scary moment, in Italy it is very cold, we are not equipped for this type of temperatures, I hope that spring comes early, I'm going to sunbathe in AUSTRALIA, as Mister Crocodile!

I think after the first 15 days the tank and all the resins are ready.

The first frame (001) has been promised and delivered to a good friend of mine, he has financially helped me realize my project REPLICA FRAME MORETTI.
Of course he wanted the chassis number 001.
I had to do him this favor.
The frame number 002 is the bike that I and a friend of Milan, the Italian league will endurance.
I decided to leave the Italian league up (trophy of the mountain).
I want to make this promise to my wife Antonella.
The road races are very dangerous.
My wife told me to make a beautiful motorcycle, and only competing on the circuit.
I will do this for her, I think you are right.
I soon as I finish the construction of the 4 frames.
I do a little calculation, I will tell you how much the kit chassis, resin parts, and other accessories.
I beg you to have a little patience.
For now the frames are already sold 2, 4 frames for sale, 4 frames yet to be built, for a total of 10 frames and then stop.

I will say again that I'm building the petrol taps with high flow, special tensioner for the swingarm MORETTI.

I'm building, fuel tank caps, billet, with the preparation, to make filling ENDURACE.




I'll show you my house, and then I'll see my bike.

I hope that everything I have said is clear.
You tell me if it is not understandable.
Hello Carlo Leroncini How many of you came to America I bought the American flag.

Attachments:
Immagine 024.jpg
Immagine 024.jpg [ 2.38 MiB | Viewed 1968 times ]
immagine 113.jpg
immagine 113.jpg [ 2.81 MiB | Viewed 1968 times ]
immagine 112.jpg
immagine 112.jpg [ 2.8 MiB | Viewed 1968 times ]

Author:  Carlo [ Thu Mar 08, 2012 6:03 pm ]
Post subject:  Re: FRAMES MORETTI LIMITED EDITION

Hello friends, I went ahead with the project "FRAME MORETTI REPLICA".
I would do a good job.
I hope to do a good job.
Things to do are many and it takes time, I think I'm about to arrive.
I still have to finish the tank cap.

I would like to replicate the fuel tap is a tap with a long range.

I replied, pulling the chain, the chain tensioner is larger than that of the frame Verlicchi.

I replied, venting of the tank, you can see the photos.
For me it is difficult to explain my work in English.
Excuse me.

Monday morning I go to my friend Succi (Europlast) and take the kit number three.
When my producer has completed the tank caps, I will tell you the price.
Just sit back, so if you lose your senses, do not be evil. :lol: :lol: :lol:

I am a fool, I'm ruined with this project. :cry:

Hello, from that Tuscany, Carlo Leoncini. :lol:

Attachments:
immagine 130.jpg
immagine 130.jpg [ 131.22 KiB | Viewed 1889 times ]
immagine 115 (2).jpg
immagine 115 (2).jpg [ 73.36 KiB | Viewed 1889 times ]
immagine 131.jpg
immagine 131.jpg [ 131.71 KiB | Viewed 1889 times ]
immagine 133.jpg
immagine 133.jpg [ 117.04 KiB | Viewed 1889 times ]
immagine 134.jpg
immagine 134.jpg [ 111.59 KiB | Viewed 1889 times ]
immagine 135.jpg
immagine 135.jpg [ 107.99 KiB | Viewed 1889 times ]
immagine 136.jpg
immagine 136.jpg [ 100.83 KiB | Viewed 1889 times ]
immagine 137.jpg
immagine 137.jpg [ 97.05 KiB | Viewed 1889 times ]

Page 3 of 8 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/