Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://www.ducatittandf1.com/ |
|
Re: TT1 Fairing and breather boxes http://www.ducatittandf1.com/viewtopic.php?f=12&t=1889 |
Page 1 of 3 |
Author: | agshark [ Mon Feb 27, 2012 1:34 am ] |
Post subject: | Re: TT1 Fairing and breather boxes |
Just seeing if anyone in Australia is interested in buying TT1 fairings. I am doing a batch off a genuine TT1 fairing and they should be pretty well priced. They are being made by a fibreglass factory and can be done in carbon as well. PM if you are interested. My first one should be done next week. |
Author: | 618F1 [ Wed Mar 14, 2012 2:12 pm ] |
Post subject: | Re: TT1 Fairing |
The fairing, and both bikes, look really great! Here in the USA Malcolm Tunstall does a good version, and even here the shipping is high because of the size and fragile nature of these, even when separated. You are working on a TT2 and a TT1? MikeV |
Author: | agshark [ Thu Mar 15, 2012 6:18 am ] | ||
Post subject: | Re: TT1 Fairing | ||
Hi Mike I have parts for both TT1 and TT2 so i just posted a picture with the TT2 tank and seat to show what a TT1 fairing would look like on a TT2. I only did the fairings because they are so hard to get in Australia. I was hoping a few may sell as to offset the cost of doing the mould. At least i can make them when i need them now. I am going to do the breather box if there are enough people wanting them. Mine fits great as the mould was taken from a factory bike. Picture showing my breather box attached Jon
|
Author: | TT2 [ Thu Mar 15, 2012 7:23 am ] |
Post subject: | Re: TT1 Fairing |
I'll definitely take a breather box ! |
Author: | 618F1 [ Thu Mar 15, 2012 10:21 am ] |
Post subject: | Re: TT1 Fairing |
And I would take at least one breather tank. These are harder to get than fairings, and can be mailed easily. MikeV |
Author: | corsa [ Thu Mar 15, 2012 9:10 pm ] |
Post subject: | Re: TT1 Fairing |
Yep, I'm keen on a breather box also. |
Author: | TT1 [ Sat Mar 17, 2012 12:47 am ] |
Post subject: | Re: TT1 Fairing |
Hi Jon Put me down for a breather box too Joe |
Author: | 618F1 [ Sat Mar 17, 2012 12:05 pm ] |
Post subject: | Re: TT1 Fairing |
I think you found a niche. A perfect widget, with a market. MikeV |
Author: | agshark [ Wed Mar 28, 2012 4:30 am ] |
Post subject: | Re: TT1 Fairing |
Just seeing if anyone in Australia wanted to buy the TT! fairings i am building as i am going to pickup my moulds from the fibreglassers in the next week and they will be harder to get. PM me if you are interested. I am not sure if i will do the breather boxes as only a few people need them Cheers Jon |
Page 1 of 3 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |