Hello ducfan,
Michael at Tranzac
regards graeme
| Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://www.ducatittandf1.com/ |
|
| The TT2 picture thread http://www.ducatittandf1.com/viewtopic.php?f=20&t=16 |
Page 2 of 3 |
| Author: | graeme [ Thu Nov 11, 2010 6:19 pm ] |
| Post subject: | Re: The TT2 picture thread |
Hello ducfan, Michael at Tranzac regards graeme |
|
| Author: | NYDESMO [ Tue Dec 07, 2010 3:16 am ] | ||
| Post subject: | Re: The TT2 picture thread | ||
Regards from New York. This is my TT2 that I believe came from Belgium. If you know the bike or any of its history I am interested to learn about it? The bike looks to be all original and never raced. The dash was changed to allow a removal pin to be used as a key. Thanks, Greg
|
|||
| Author: | Eldert [ Wed Dec 08, 2010 6:51 am ] |
| Post subject: | Re: The TT2 picture thread |
Hi Greg Belgium , did you buy the bike from Bart Crauwels by any chance ? Eldert |
|
| Author: | Pantah600 [ Mon Jan 10, 2011 4:24 am ] |
| Post subject: | Re: The TT2 picture thread |
Hi all, this is the start of my project. Besides the long weeds... I'm still gathering bits and pieces. Questions will come soon for you all. Cheers, Steve |
|
| Author: | duc_181 [ Mon Jan 10, 2011 1:12 pm ] |
| Post subject: | Re: The TT2 picture thread |
Cool! I've got the same picture (but from my basement with suitcases and discarded kids toys surrounding it instead of weeds). Mine's nearing 2 years old and hoping to see daylight this summer. Good luck! |
|
| Author: | la tige [ Tue Jan 11, 2011 1:38 am ] |
| Post subject: | Re: The TT2 picture thread |
graeme wrote: Hello ducfan, Michael at Tranzac regards graeme hello, searching for an exhaust like this one, for my F1, anybody knows? ciao Philippe |
|
| Author: | graeme [ Tue Jan 11, 2011 2:30 am ] |
| Post subject: | Re: The TT2 picture thread |
Hello Philippe, This was made by Michael at Tranzac Exhausts in Brisbane (Australia) I don't know where you are, but I assume it's not here. I gave Michael my bare TT2 and asked him to copy a picture of a factory bike and keep the pipe as close as possible to the engine. I think he did a good job. and cheap too ($600 AUD) I cleaned up the welds and painted it. Maybe you could do the same with a local exhaust builder in your area? Regadrs Graeme |
|
| Author: | la tige [ Wed Jan 12, 2011 5:29 am ] |
| Post subject: | Re: The TT2 picture thread |
Thanks Graeme, BTW a little far from you  , located in franceis sound level acceptable? |
|
| Author: | graeme [ Wed Jan 12, 2011 6:48 am ] |
| Post subject: | Re: The TT2 picture thread |
Acceptable to who? It's volume is controled by the throttle, but ok. (lower revs past police stations) Not as loud as some Harleys How's the weather in France? graeme |
|
| Author: | fmcd92 [ Thu Jan 13, 2011 11:58 am ] | ||
| Post subject: | Re: The TT2 picture thread | ||
Upload size test An older pic from when I ran a different setup, same Verlicchi basics, Fran
|
|||
| Page 2 of 3 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|