Well after much pondering, I will be selling my F1 which is probably the quickest and most developed Ducat F1 replica in the UK.
The full build thread is here
viewtopic.php?f=25&t=1652Developed constantly since its debut late 2012, it has been raced in the Golden Era superbike series and has been on the podium with a best of 2nd and 3rd at Anglesey last time out. Its the only air-cooled 2 valve bike in the paddock.
Because we are up against late 90's superbikes, it will always be a power struggle so we are building a trick YZF750 for 2014 and with increased sponsorship from Baxi, we need to be sure we can win.
It would clean up in classic racing no doubt at all about that, but its not a series I want to be in really hence the sale.
We are at Mallory this weekend and wont stop trying to get on top of that podium, most of all I want to thank Dad on TV to make him proud.
Vid from Anglesey, our race is 14min 30 in, you can see what I'm up against !
http://www.youtube.com/watch?v=zY0S5uCU-b8Chassis
JD Racing TT F1 frame and swingarm. The swingarm has the ribs and profile of the original bikes. We havent seen one replica with this detail in and the swingarm is exactly how they were.
43mm Kayaba forks with full race internals
Showa re-valved rear shock
17 x 3.5 Dymag H section front and Marchesini 5 spoke front, R6 rear 5.5 wheels.
Top yoke is currently MotoGP style (different to the pictures), but a new period one will be machined.
Engine: JD racing tuned and built
Heavily re-worked inlet ports with custom manifolds.
Ducati ST2 camshafts (longer duration)
Vernier cam pulleys
Omega pistons and Carrillo rods (944cc)
Shortened crank on ignition side with slimmer ignition cover (by 40mm)
Lightened flywheel (used for pick up only)
Lightened timing gears
748/ 916 coils
Ignitech TCIP4 ignition
JD racing 50mm header, 2-1 system with 60mm titanium silencer (103db)
Large crank breather box (large volume with one way valve on the exit)
Oversize oil cooler
Forgot to add...
SparesEngine cases, crank, cylinders, some internals
Wets on wheels
Sprockets, levers etc
Footpegs
Spare 38mm small bore Akropvic silencer (102db)
NotesPower 104hp (DTS dyno)
Weight 138kg, with oil and a bit of fuel
Full technical back up always available to the buyer if needed.
Serious enquiries only.
07837 957041 John
Or Pm me on here.
(edited as I left some info out)