wtb cush for a 4.5 marchesini

crash · **Joined:** Fri Jan 07, 2011 9:55 pm **Posts:** 29

Does either of these help? Marchesini sprocket carrier (old stock) and new manufactured cushions. If these cushions appear to be the correct size (I can pull out the calipers when I find them) please respond to this thread and I will see if we can get another run of them made as these are the last of the previous batch. They are elastomer and not rubber as the original Marchesini's were and are therefore much more durable. The carrier is surplus to my current needs.

crash · **Joined:** Fri Jan 07, 2011 9:55 pm **Posts:** 29

618F1 wrote:

Paul. What is the measurement, in mm, center-to-center, from one bolt to another? I have one odd sprocket carrier here with 52mm spacing. If that fits, then it is only the five bolts and the cush rubbers/bushings you will need; what is the diameter of those holes? MikeV

6. His wheel requires a 6 bolt carrier not 5.

Marvics were 5 bolt back in the day as were the Technomagnesios

Here is an old stock Marvic carrier and a cush drive I had fabbed for a Techno rim...

graeme · **Posted:** Sat Nov 09, 2013 4:35 am

124mm centre to centre on a 696 cush drive so it looks too wide.

huit · **Joined:** Sat Oct 29, 2011 3:38 pm **Posts:** 798

Crash it looks very close, can you measure centre to centre of the studs?
Mine is a 95 mm bolt circle, if yours is the same I will take!
Thanks Paul

crash · **Joined:** Fri Jan 07, 2011 9:55 pm **Posts:** 29

This one appears to be 100mm.

huit · **Joined:** Sat Oct 29, 2011 3:38 pm **Posts:** 798

Thanks Crash, I found a marvic one the same with 100 bolt cirlce, looks like I will have to make one!
It is definetly a 95 mm bolt circle.
The search continues!!
Thanks to all that replied.
Paul

wtb cush for a 4.5 marchesini

Who is online