| Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://www.ducatittandf1.com/ |
|
| WANTED 907ie front Brake disc set http://www.ducatittandf1.com/viewtopic.php?f=22&t=10867 |
Page 1 of 1 |
| Author: | customheadf1750 [ Wed May 28, 2014 1:33 am ] | ||
| Post subject: | WANTED 907ie front Brake disc set | ||
not TT1/F1 but who else would have these.... thought i had 1989 900ss forks on the 750 Sport project but the 320mm rotors dont let the calipers bolt up. pretty sure it will be the 907ie BB1 forks that take the 300mm rotors then. annoying. anyone have some rotors hanging around? or a whole wheel...... regards Sean
|
|||
| Author: | crowster69 [ Wed May 28, 2014 4:19 am ] |
| Post subject: | Re: WANTED 907ie front Brake disc set |
Looks to me that you have 89/90 900ss forks there but they actually did come out with 300mm disks as did the 91 907.In 92 the 907 went to 320mm disks.sorry cant help you with disks but i think the 300mm disks will be what you want |
|
| Author: | customheadf1750 [ Wed May 28, 2014 5:02 am ] |
| Post subject: | Re: WANTED 907ie front Brake disc set |
Hey crowster, so these specs are slightly wrong then? http://www.motorcyclespecs.co.za/model/ ... s%2090.htm |
|
| Author: | crowster69 [ Wed May 28, 2014 5:56 am ] |
| Post subject: | Re: WANTED 907ie front Brake disc set |
yep i would say they are wrong.I bought a 89/90 model ss from new and mine had 300mm disks and the same forks as you have on your bike.In my falloon 2 valve book he also confirms this http://www.ebay.com/itm/MetalGear-Brake ... 2e&vxp=mtr |
|
| Author: | 618F1 [ Wed May 28, 2014 12:26 pm ] |
| Post subject: | Re: WANTED 907ie front Brake disc set |
One or two months ago this fellow, Nick, had what you need. If they are gone then you can look for Yamaha TZ discs (Yoyodyne); same in every needed measurement. MikeV nick@angladaoriginals.com And, there are these: http://www.ebay.com/itm/Late-Ducati-300 ... 1e&vxp=mtr |
|
| Author: | pantah_good [ Wed May 28, 2014 12:48 pm ] |
| Post subject: | Re: WANTED 907ie front Brake disc set |
Do those Supersport 300 rotors have the same pilot dia. and mounting hole pattern as the 320 rotors? And Mike, are you sure there isn't a small offset difference between TZ and Ducati rotors? Bill |
|
| Author: | 618F1 [ Wed May 28, 2014 2:19 pm ] |
| Post subject: | Re: WANTED 907ie front Brake disc set |
Bill. I'm not sure of anything. But the bolt holes on the new ones on eBay (they look like take-offs to me) are 80mm, and the seller would certainly help with info. I have a set of Brembo 300mm TZ rotors, and they are "flat", like all the Ducati versions of the 1990s-2000s, often shown as 10mm offset. The centerline of the discs on later-version wheels is 120mm, same as on many Ducatis of the 90s and after. If they are that close something can be made to work. Someone one eBay is selling 2-6mm spacers for the 64/80mm pattern now. MikeV |
|
| Author: | customheadf1750 [ Wed May 28, 2014 9:23 pm ] |
| Post subject: | Re: WANTED 907ie front Brake disc set |
Thanks for all the help and info Sean |
|
| Author: | nojapanbike [ Thu May 29, 2014 2:55 pm ] |
| Post subject: | Re: WANTED 907ie front Brake disc set |
hi you can use Cagiva Mito 125 rotors Ciao |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|