Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum
http://www.ducatittandf1.com/

engine mount bolts wtb
http://www.ducatittandf1.com/viewtopic.php?f=22&t=1147
Page 1 of 1

Author:  huit [ Tue Nov 15, 2011 4:28 pm ]
Post subject:  engine mount bolts wtb

Looking for a pair of engine mount bolts for a tt2.
Thanks Paul

Author:  ducttf1 [ Tue Nov 15, 2011 9:50 pm ]
Post subject:  Re: engine mount bolts wtb

Hi Paul, are you looking for the front bolts or rear bolt? You can substitute the front bolts with standard 10mm socket head allens. The originals are no longer available. The rear I have not been able to source out just yet, but I have run out of originals. Anyone find a supplier? Lou

Author:  huit [ Wed Nov 16, 2011 6:50 am ]
Post subject:  Re: engine mount bolts wtb

Thanks Lou, I am looking for both front and rear.
Paul

Author:  Poison [ Thu Nov 17, 2011 4:00 am ]
Post subject:  Re: engine mount bolts wtb

Maybe I shouldn't admit to such wayward enthusiasm in the search to lose weight, but "back in the day" when I raced (for want of a better word) my Pantah, I used those lovely aluminium 10mm bolts (anodized gold...) for the front engine mounts. Strangely, despite regularly crashing, I never suffered a single breakage in the front engine mount department!

Author:  ti64pete [ Fri Nov 18, 2011 3:45 am ]
Post subject:  Re: engine mount bolts wtb

I can make you them in either titanium or 7075 alloy if you are stuck.

Author:  huit [ Sat Nov 19, 2011 1:01 pm ]
Post subject:  Re: engine mount bolts wtb

Thanks for the offer Pete, I will consider your offer.
Can you send me a pm with the approximate cost , or just post it!
Thanks Paul

Author:  ti64pete [ Mon Nov 21, 2011 4:07 am ]
Post subject:  Re: engine mount bolts wtb

its a Ducati so really they should be titanium! how long are they? and they're M10 i assume. cheapest option is a stud with nut at each end, about £15 each give or take depending on length (not including nuts), as a bolt with flanged hex head then up to about £50 each again depending on length, they are very hard to do as a bolt!

cheers

pete

Author:  huit [ Mon Nov 21, 2011 8:46 pm ]
Post subject:  Re: engine mount bolts wtb

Thanks Pete
The ones in there now are way to long, I will make a measurement and let you know.
Paul

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/