Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum
http://www.ducatittandf1.com/

Meyers Performance Race Pistons for Alazzurra, Ducati 650 an
http://www.ducatittandf1.com/viewtopic.php?f=22&t=2081		 Page 1 of 1
Author:  loudbike [ Fri Mar 23, 2012 9:18 am ]
Post subject:  Meyers Performance Race Pistons for Alazzurra, Ducati 650 an
We're delighted to be carrying some of Ducati Hall of Fame tuner Bruce Meyers' performance products for vintage Ducatis - particulary these high-quality forged pistons designed by Bruce to give the small block Ducati twins a needed boost in compression (and displacement) for competition use.

82mm Race Piston for 650cc Pantah (Alazzurra).
Attachment:
Meyers Performance Vintage 82mm Hi-compression Race Piston Set - Ducati 650 Pantah Alazzurra.JPG
Meyers Performance Vintage 82mm Hi-compression Race Piston Set - Ducati 650 Pantah Alazzurra.JPG [ 2.6 MiB | Viewed 1170 times ]
This is a drop-in (no rebalancing of the crankshaft required) piston with 13:1 compression with pockets that support 1mm oversize valves and most cams including the NCR #7 and V2. The dome has enough meat to allow the dome to be machined down to 11.5:1 if you're looking for trackday/street use.

90mm (780cc) Race Piston for Ducati 750cc (later, bathtub combustion chamber).
Attachment:
Meyers Performance Vintage 90mm 780cc Race Piston Set for Ducati 750cc Supersport Monster.JPG
Meyers Performance Vintage 90mm 780cc Race Piston Set for Ducati 750cc Supersport Monster.JPG [ 2.54 MiB | Viewed 1170 times ]
These pistons are designed to be installed in race motors by experienced tuners and offer a nice boost in power and torque through the 13.5:1 compression and increased bore. You’ll need to re-bore and re-plate your cylinders and on some combustion chambers, you’ll need to trim a bit of material from the outside of the valve pocket.

The 90mm slugs will take a 1mm oversize valve and are designed for the 900SS and V2 cams; NOT the NCR #7.

Both sets will boost torque and horsepower and come and come completed with pins, clips and nitride treated rings.

Now available on the loudbike Store http://www.loudbikestore.com/meyers-performance-vintage-pistons-c-1284_1285.html
Author:  Carlo [ Tue Mar 27, 2012 5:00 pm ]
Post subject:  Re: Meyers Performance Race Pistons for Alazzurra, Ducati 65
I am very a lot of beautiful, compliments lou.

Ciao Carlo. ;)
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/