As per the title, I'm looking for a full set of rubber dampers for the head fins (P/N 067017395). Loudbike Steve seems to believe some of the die hard racers amongst us might have a box or two stashed away - I hope he's right! As usual, will happily pay a good price with shipping to Oz.
Hi Graeme, the Pantah has a different fin spacing to the F1 - I think it was 6mm Vs 7mm, or something like that. I'll need to double check & get back to you on this when I get home. Clinton
I've measured the fins on the F1 & they do in fact have a 7mm spacing. The old remaining dampers measure 12 mm OD & 6.5 mm thick (I assume they have compressed & hardened with all the heat). I need to thank Loudbike Steve for pointing the fin spacing sizes out, or else I would never have been aware & probably end up with the wrong bits. Clinton
Post subject: Re: WTB F1 Cylinder Head Vibration Dampers
Posted: Mon Jun 25, 2012 9:25 pm
Joined: Thu Oct 14, 2010 7:30 am Posts: 174
I know this is an old post but Honda gasket kits used to include the fin dampers in the engine sets and if I recall they were very close in size to the Ducati parts. Don't know if that stuff is still around though.
Users browsing this forum: No registered users and 210 guests
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum