|
View unanswered posts | View active topics
Author |
Message |
Palmer
|
Post subject: Re: Palmer / Munro F1 Hot-Rod Build-Off Posted: Tue Aug 09, 2011 10:14 pm |
|
Joined: Mon Oct 04, 2010 7:47 am Posts: 104 Images: 0
|
Hi Rich, Were you able to make the gasket work for the fuel tank? Your bike is 3.6 pounds lighter then mine. Put some pictures of it on the forum.
Steve, How much does the yellow bike weight.
Barber should be great fun, looking forward to seeing everyone.
Palmer
|
|
Top |
|
|
rp84
|
Post subject: Re: Palmer / Munro F1 Hot-Rod Build-Off Posted: Thu Aug 11, 2011 12:08 am |
|
Joined: Sat Oct 16, 2010 7:34 pm Posts: 77 Location: Southwick, Massachusetts USA
|
Hi Gary,
Yes, thanks so much. It helped alot. I was able to make a good tank filler cap gasket with what you sent. I haven't ridden it yet with a full tank and lots of swishing so I'm not 100% sure it is tight, but it seems good so far. I need a shakedown run before Barber.
I'm ashamed to say I haven't been able to post pictures yet and I have lots of them. Last few times I tried and failed. I still need to figure it out.
I was a bit surprised and happy it weighed only 322 lbs. I remember it was 335 back in the day. Rich
|
|
Top |
|
|
loudbike
|
Post subject: Re: Palmer / Munro F1 Hot-Rod Build-Off Posted: Thu Aug 11, 2011 7:04 am |
|
Joined: Sun Aug 08, 2010 4:37 pm Posts: 362 Images: 6 Location: Ottawa, Ontario, The Great White North
|
Hey, Rich:
Should be easy (although not as intuitive as it could be)..
Below the area used to compose your post (you may have to scroll down to see it) there are two tabs: 'Options' and 'Upload Attachment'. Go to the 'Upload Attachment' tab and hit the 'Browse' button to select from your hard drive the image you want to post. 'Add the file' and then browse for the next one. 'Place inline' is optional. but helpful if you want to change the order in which the images uploaded appear.
There's no size limit set, but I've had the forum time-out when I upload an image greater than 2mb.
Let me know if you still have problems, OK?
Regards,
_________________ Steve Munro Montreal, QC CANADA
|
|
Top |
|
|
rp84
|
Post subject: Re: Palmer / Munro F1 Hot-Rod Build-Off Posted: Fri Aug 19, 2011 11:38 pm |
|
Joined: Sat Oct 16, 2010 7:34 pm Posts: 77 Location: Southwick, Massachusetts USA
|
Hi Steve, Thanks for the advice. It appears I was succesful in posting some pictures of my 750F1 in the image section. Rich
|
|
Top |
|
|
athleticroman
|
Post subject: Re: Palmer / Munro F1 Hot-Rod Build-Off Posted: Mon Aug 22, 2011 7:16 pm |
|
Joined: Sun Nov 28, 2010 4:13 am Posts: 659 Images: 0 Location: Sydney, Australia
|
It looks like the Loudbike F1 800 has achieved "Legendary Status" on ebay. Sadly the Loudbike logo has been edited from the picture. Attachment:
File comment: eBay image
CCopy.jpg [ 35.82 KiB | Viewed 3099 times ]
eBay link http://www.ebay.com.au/itm/DUCATI-800-F ... 2c5ec46690The Legendary DUCATI 800 F1 Quality Print (A3 - 11.6 x 16.5 INCHES) with Gloss Laminate encapsulating & protecting this poster making this ideal for the workshop, garage, home, office etc. This will last you for years to come! AMAZING VALUE & QUALITY BID WITH CONFIDENCE All posters capture the full detail of the motorcycle & are shipped in a Strong Postal Tube for protection! (Picture frame Not Included) Please see my other listings for more motorcycle posters! I will combine postage for 2 up to 6 posters for the same shipping cost as 1. Thanks for looking. Original image posted earlier in this thread. Attachment:
File comment: Original image
RC.JPG [ 2.96 MiB | Viewed 3099 times ]
It is a very nice looking bike Steve!
_________________ Mike, Sydney Australia https://www.facebook.com/groups/HandHeldDyno
|
|
Top |
|
|
rp84
|
Post subject: Re: Palmer / Munro F1 Hot-Rod Build-Off Posted: Tue Aug 23, 2011 11:19 pm |
|
Joined: Sat Oct 16, 2010 7:34 pm Posts: 77 Location: Southwick, Massachusetts USA
|
One of the best looking bikes I've ever seen. Rich
|
|
Top |
|
|
teetee2
|
Post subject: Re: Palmer / Munro F1 Hot-Rod Build-Off Posted: Wed Aug 31, 2011 1:12 pm |
|
Joined: Sun Oct 17, 2010 2:24 pm Posts: 30 Images: 4
|
Surely the most sincere form of flattery....Steve you must be proud
|
|
Top |
|
|
loudbike
|
Post subject: Re: Palmer / Munro F1 Hot-Rod Build-Off Posted: Wed Aug 31, 2011 3:35 pm |
|
Joined: Sun Aug 08, 2010 4:37 pm Posts: 362 Images: 6 Location: Ottawa, Ontario, The Great White North
|
Thanks, guys - serious blushing going on.. ..But it goes as as it looks (if not better) - and Mr. Palmer gets the credit for that..
Regards,
_________________ Steve Munro Montreal, QC CANADA
|
|
Top |
|
|
Palmer
|
Post subject: Re: Palmer / Munro F1 Hot-Rod Build-Off Posted: Thu Oct 13, 2011 9:45 pm |
|
Joined: Mon Oct 04, 2010 7:47 am Posts: 104 Images: 0
|
WOW, Barber was great fun. It was really good to see everyone and boy what a great track to ride. We had a lot of engine issues in getting the bike ready for the Barber event and actual had to build the motor like twice after some experimental parts failed at a test and tune trackday two weeks before Barber. We ended up with a mild 86 hp motor that ran good all weekend. The grid was pretty full with 33 bikes in BOT3 class and I got to start toward the middle in each of the two races on row 6 on Saturday and row 5 on Sunday (I haven't had to start that far back in years) I ended up with a 3rd on Saturday and a 4th Sunday which was all great fun. Palmer
|
|
Top |
|
|
graeme
|
Post subject: Re: Palmer / Munro F1 Hot-Rod Build-Off Posted: Fri Oct 14, 2011 2:47 am |
|
Joined: Sun Nov 07, 2010 10:54 pm Posts: 541 Location: Brisbane
|
|
Top |
|
|
Who is online |
Users browsing this forum: No registered users and 7 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|
|