has anyone ever seen one with a hole like this?
i think it has twisted. it was quite hard to get out. not seized as such, just required quite a lot of force to turn.
| Attachments: |
|
F1 strainer.JPG [ 111.96 KiB | Viewed 1890 times ] |
| Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://www.ducatittandf1.com/ |
|
| Oil pick up strainer http://www.ducatittandf1.com/viewtopic.php?f=24&t=10799 |
Page 1 of 1 |
| Author: | brad black [ Tue Mar 18, 2014 7:56 am ] | ||
| Post subject: | Oil pick up strainer | ||
has anyone ever seen one with a hole like this? i think it has twisted. it was quite hard to get out. not seized as such, just required quite a lot of force to turn.
|
|||
| Author: | Carlo [ Tue Mar 18, 2014 5:49 pm ] |
| Post subject: | Re: Oil pick up strainer |
 incredibile!!!
|
|
| Author: | brad black [ Tue Mar 18, 2014 9:14 pm ] |
| Post subject: | Re: Oil pick up strainer |
yeah, that's what i thought. |
|
| Author: | wdietz186 [ Tue Mar 18, 2014 9:28 pm ] |
| Post subject: | Re: Oil pick up strainer |
I'd bet it was made that way. If you had twisted it that much the case threads have to be buggered and the hole[s] would have fracture lines on the edges. I know things are different down under but how do you work having to put things UP to sit on the workbench? Is everything upside down there? |
|
| Author: | graeme [ Wed Mar 19, 2014 1:33 am ] |
| Post subject: | Re: Oil pick up strainer |
Can't see the problem Bill? it's the right way up on my computer down here 
|
|
| Author: | Sumfun4me [ Wed Mar 19, 2014 6:28 pm ] |
| Post subject: | Re: Oil pick up strainer |
Bill - it's only really a problem when we drop something. |
|
| Author: | Carlo [ Fri Mar 21, 2014 10:08 am ] |
| Post subject: | Re: Oil pick up strainer |
| Sumfun4me wrote: Bill - it's only really a problem when we drop something.
|
|
| Author: | wdietz186 [ Fri Mar 21, 2014 11:20 pm ] |
| Post subject: | Re: Oil pick up strainer |
That must make crashes interesting! Do you fall onto the bike when you highside? |
|
| Author: | brad black [ Fri Mar 28, 2014 5:24 am ] |
| Post subject: | Re: Oil pick up strainer |
i got a new strainer, and it was tight, but not as tight as the original. but i couldn't run a 22 x 1.5 tap through the case thread as it just wouldn't start. and i couldn't run a die over the strainer thread as the plastic strainer is bigger than the id of my die. bit of a clusterfuck all round. |
|
| Author: | pantah_good [ Fri Mar 28, 2014 6:49 am ] |
| Post subject: | Re: Oil pick up strainer |
Maybe running those strainer threads under a softer wire wheel on a bench grinder for a while might make them screw in and out easier. Bill |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|