| Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://www.ducatittandf1.com/ |
|
| FUEL TANK MOUNTING RUBBERS; WHAT TO USE: 750 F1 - 1985 http://www.ducatittandf1.com/viewtopic.php?f=24&t=11515 |
Page 1 of 1 |
| Author: | dukemoto [ Thu Mar 02, 2017 9:36 pm ] |
| Post subject: | FUEL TANK MOUNTING RUBBERS; WHAT TO USE: 750 F1 - 1985 |
What do you use as replacement Fuel Tank mounting rubbers? 1985 Australian issue with alloy tank, front rubber strap type. Is there a suitable stick-on rubber that will do the job, or is there some form of frame tube mounted rubber that is a better option? Anyone have correct throttle cable lengths for std 36 carbs? Thanks for any help. |
|
| Author: | 618F1 [ Fri Mar 03, 2017 1:24 pm ] |
| Post subject: | Re: FUEL TANK MOUNTING RUBBERS; WHAT TO USE: 750 F1 - 1985 |
I do not own an F1a, so do not know what the tank rubbers look like. However, NOS 008 and 009 on this page were in common use then. Good people to buy from. MikeV http://www.europlastsucci.com/varie.php |
|
| Author: | 618F1 [ Sat Mar 04, 2017 2:34 pm ] |
| Post subject: | Re: FUEL TANK MOUNTING RUBBERS; WHAT TO USE: 750 F1 - 1985 |
I see from the F1a parts manual on this site that the tank buffers appear to be long square strips. Never seen one in person. Here is what I believe is a set of 36mm carb throttle cables: H is 33 inches total, 27 3/4 for just the sheath: V is 44 1/2 total, 39 1/4 for just the sheath; free cable and barrel lengths outside the sheaths is 4 7/8 inches. Hope this helps. MikeV Attachment: cable 1.JPG [ 3.59 MiB | Viewed 1111 times ] Attachment: cable 2.JPG [ 3.56 MiB | Viewed 1111 times ] |
|
| Author: | Cal [ Sun Mar 05, 2017 1:20 pm ] |
| Post subject: | Re: FUEL TANK MOUNTING RUBBERS; WHAT TO USE: 750 F1 - 1985 |
618F1 wrote: I see from the F1a parts manual on this site that the tank buffers appear to be long square strips. Never seen one in person. Here is what I believe is a set of 36mm carb throttle cables: H is 33 inches total, 27 3/4 for just the sheath: V is 44 1/2 total, 39 1/4 for just the sheath; free cable and barrel lengths outside the sheaths is 4 7/8 inches. Hope this helps. MikeV Attachment: cable 1.JPG Attachment: cable 2.JPG I took a look, I have some OEM cables from an 87. Slightly different numbers Long cable 44 3/4 and 40 1/2 sheath Short cable 28 3/4 and 24 1/2 sheath These are used, but were take taken off early, will sell them if you want them. Clay ps I am new to the list, I will have a little pile of F1 parts for sale that I will post up. |
|
| Author: | dukemoto [ Sat Mar 11, 2017 8:56 am ] |
| Post subject: | Re: FUEL TANK MOUNTING RUBBERS; WHAT TO USE: 750 F1 - 1985 |
Thanks for the responses, Mike and Cal. The cable info will save me some time. Looks like stick-on rubber is what I will use. Cheers. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|