Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://www.ducatittandf1.com/ |
|
1980's brake identification http://www.ducatittandf1.com/viewtopic.php?f=24&t=11520 |
Page 1 of 1 |
Author: | pantah_good [ Tue Mar 07, 2017 10:50 am ] |
Post subject: | Re: 1980's brake identification |
Very nice brake parts! Cranky should know the p/n's for the calipers and master. I know a little about the tiny F04. It has been made by several different manufactures since Brembo/MQ, and is now popular with ultralight aircraft builders and on trials bikes. New calipers and rebuild kits still available, and used calipers are on eBay. http://cyclebrakes.com/html/brembo_caliper_2.html http://www.ajpamerica.com/calipers.html-----(click on "dealers" for places to buy) http://www.splatshop.co.uk/ajp-frontandrear-calliper.html https://bvm-moto.co.uk/Trials%20Parts%20Clothing%20and%20Accessories%20/Brake%20Levers%20Pads%20Accessories/Brake%20Cylinders%20Calipers%20Accessories?product_id=145 http://www.maxiscoot.com/ajp-brake-caliper-front-derbi-senda-ajp-b-cal-012-3.html |
Author: | Cal [ Tue Mar 07, 2017 10:59 am ] |
Post subject: | Re: 1980's brake identification |
Since I have that little brembo, do you think it would be worth mounting it up? I dont think I would go out and buy one....but they must work somewhat. I had heard that even some 851 guys were using these on the back. It must have just been for "weight" purposes. |
Author: | pantah_good [ Tue Mar 07, 2017 12:08 pm ] |
Post subject: | Re: 1980's brake identification |
Well it's probably not best for heavier use, you'll have to make all your mounting brackets for it, and the rotors it is meant to work on are in all likelihood not going to bolt right up on the Ducati Pantah type wheels we mainly use, as well as them being small, thin, delicate, and harder to come by. But, it is great for saving on un-sprung weight and will pass tech inspection. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |