Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://www.ducatittandf1.com/ |
|
tt1 tt2 tubing sizes and wall thickness http://www.ducatittandf1.com/viewtopic.php?f=24&t=11965 |
Page 1 of 1 |
Author: | andyman64 [ Sun Dec 15, 2019 2:02 pm ] |
Post subject: | tt1 tt2 tubing sizes and wall thickness |
hi i am building a tt2 f1 frame and would love to know if any one has specs on the tubing sizes and wall thickness and what others on here have used for bending the tubing |
Author: | 618F1 [ Mon Dec 16, 2019 12:12 pm ] |
Post subject: | Re: tt1 tt2 tubing sizes and wall thickness |
OK. I kinda waited for Ian Falloon to chime in, but he is away, so: It is commonly stated that the big tubes are 25mm diameter, and I measured that as so; the smaller tubes near the footpegs are 16mm; and, the thickness seems to be about 1.80mm. The headstock is 60mm, and seems to be "waisted" in the middle, and turned at the ends for the 52mm bearing races. There are 28mm frames (DM, in Italy, for one), and I suspect the tubes are thinner, but cannot confirm that. As far as tube bending, you are on your own. I hope this helps. MikeV |
Author: | andyman64 [ Tue Dec 17, 2019 11:54 am ] |
Post subject: | Re: tt1 tt2 tubing sizes and wall thickness |
thank you Mike v |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |