Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum
http://www.ducatittandf1.com/

750 F1 Specs & Info
http://www.ducatittandf1.com/viewtopic.php?f=24&t=164
Page 5 of 11

Author:  Belt Boy [ Sat Aug 27, 2011 5:07 am ]
Post subject:  Re: 750 F1 Specs & Info

Hello, I have only just come across this interesting forum and would like to add some information that may be of benefit. At the start of this thread some pictures and specs where given concerning the rear shock for the F1 Montjuich. Please find here photos of a new and unused shock specifically for the Ducati F1 Montjuich model. Note that the part number, 037759100, and the configuration of the shock is quite different from the rear shocks pictured earlier in this thread. Please note that most parts specific to the Ducati F1 Montjuich begin with 0377XXXXX .

Attachments:
F1 Montjuich Shock 003.jpg
F1 Montjuich Shock 003.jpg [ 2.2 MiB | Viewed 1269 times ]
F1 Montjuich Shock 004.jpg
F1 Montjuich Shock 004.jpg [ 2.17 MiB | Viewed 1269 times ]
F1 Montjuich Shock 002.jpg
F1 Montjuich Shock 002.jpg [ 2.27 MiB | Viewed 1269 times ]
F1 Montjuich Shock 005.JPG
F1 Montjuich Shock 005.JPG [ 381.5 KiB | Viewed 1269 times ]

Author:  PetriF1 [ Thu Oct 20, 2011 5:24 am ]
Post subject:  Re: 750 F1 Specs & Info

Regarding the PVS4 topics posted here, I was wondering what pressure it should be pumped up to? Any ideas? I bought a 1985 F1 from Japan ( via Marseille, France) a while ago, and havent found the answer yet..

Author:  Dukerdr [ Mon Nov 14, 2011 10:05 pm ]
Post subject:  Re: 750 F1 Specs & Info

I never worked on a PVS4, but I doubt it's much different than other gas pressurized shocks.

Most use nitrogen in the 140 to 145 lb range. All you need to do is get enough pressure in it to hold errant air particles at bay and keep them from emulsifying with the oil.

Someone like Racetech (or a suspension company near you) may know more.


.

Author:  Sumfun4me [ Tue Apr 10, 2012 6:25 am ]
Post subject:  Re: 750 F1 Specs & Info

Does anybody know if there was a Brembo part number for the original 280mm floating rotors used on the 85/86 F1 (Ducati # 067577340)? Alternatively, if anyone knows where I might find a set for my rebuild (I've tried all the usual suspects, but figure they must have been used on other branded bikes of the time)?

Clinton

Author:  pantah_good [ Tue Apr 10, 2012 7:56 am ]
Post subject:  Re: 750 F1 Specs & Info

Hi Clinton,
I think there may be a set for sale on the 851/888 forum. I sent him a PM for more info, and if they're the right ones I'll send you a PM with contact info.
Bill

Author:  Sumfun4me [ Wed Apr 11, 2012 4:07 am ]
Post subject:  Re: 750 F1 Specs & Info

An update:

The '85 / '86 Vitaloni mirrors use the same internals & outer shell as the (still available) Vitaloni Convex Sebring mirrors. The original mounts will need to be retained, but the shell is exact down to the molded part numbers, etc. I purchased a pair from Talbot & Co in the US for about $100 a piece. The guy that I dealt with (Gunther) was very helpful.

Clinton

Author:  pantah_good [ Wed Apr 11, 2012 7:35 am ]
Post subject:  Re: 750 F1 Specs & Info

Sorry Clinton, found out those rotors are aftermarket 320mm floating iron ones as used on later 851's/916/etc. Is Carlo on your "usual suspect" list?
Bill

Author:  Sumfun4me [ Wed Apr 11, 2012 10:30 am ]
Post subject:  Re: 750 F1 Specs & Info

Thanks for the help Bill, but I may have found a pair of NOS units in Germany - I'm just waiting on confirmation.

Author:  Sumfun4me [ Fri Apr 13, 2012 9:17 am ]
Post subject:  Re: 750 F1 Specs & Info

Another update:

The '86 brake master cylinder (P/N 037754330) is the same as the unit used on the bevel twins (P/N 080554300). The actual brake lever is different when purchased as a complete unit (the bevel unit has a polished alloy lever whilst the F1 is painted black). Even the casting numbers on the cylinder match the F1.

Author:  Sumfun4me [ Sat Apr 21, 2012 12:15 pm ]
Post subject:  Re: 750 F1 Specs & Info

Can anyone tellme which spark plug cap was used on the '86 F1? A good photo would also help if anyone has one.

Page 5 of 11 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/