DUCATI TT and F1 FORUM
 
It is currently Thu Jun 22, 2017 9:36 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 105 posts ]  Go to page Previous  1 ... 4, 5, 6, 7, 8, 9, 10, 11  Next
Author Message
 Post subject: Re: 750 F1 Specs & Info
PostPosted: Sun Apr 22, 2012 5:15 am 
Offline

Joined: Thu Oct 28, 2010 4:44 am
Posts: 1333
Images: 7
pantah_good wrote:
Carlo,
I mentioned you because I thought you made very nice disc brake rotors and carrier assemblies. Was I correct?
Bill



Hello Bill, as I told you, I can not understand the whole meaning of your speech, your English is different from English in England, and the simultaneous translator does not work well.

However you still say that the disc brakes of Carlo leoncini are the most beautiful in the world! :lol:

Sorry if I do not understand, but I'm very happy to be with you all.

Viva gli Stati Uniti D'America. CARLO


Top
 Profile Personal album  
 
 Post subject: Re: 750 F1 Specs & Info
PostPosted: Sun Apr 22, 2012 5:24 am 
Offline

Joined: Thu Oct 28, 2010 4:44 am
Posts: 1333
Images: 7
Sumfun4me wrote:
Can anyone tellme which spark plug cap was used on the '86 F1? A good photo would also help if anyone has one.



Hello, this is the photo of my Montjuic, I think they are original, given that the bike has done a few kilometers.

I hope I was of your help.

Carlo


Attachments:
Immagine 009.jpg
Immagine 009.jpg [ 2.45 MiB | Viewed 781 times ]
Top
 Profile Personal album  
 
 Post subject: Re: 750 F1 Specs & Info
PostPosted: Sun Apr 22, 2012 4:52 pm 
Offline

Joined: Sun Aug 08, 2010 8:03 pm
Posts: 653
Images: 0
Hi Clinton, Carlos picture is of the proper spark plug cap. It is a Bosch #035 635 027, also has a 5K RTFM20 number. Interesting it has a Bosch cap on a motoplat coil. I think Bosch bought Motoplat. I bet you can still get these on ebay or other suppliers. Let me know if you have trouble, I might have some used ones somewhere. Lou


Top
 Profile Personal album  
 
 Post subject: Re: 750 F1 Specs & Info
PostPosted: Sun Apr 22, 2012 7:12 pm 
Offline

Joined: Thu Apr 21, 2011 4:29 am
Posts: 275
Images: 1
Thanks Lou, I had narrowed it down to the Bosch unit but needed some confirmation - these are pretty readily available new, but I haven't found any in OZ yet (the rest of the suppliers I found on-line wont ship to OZ). I'm running down another couple of options right now.Clinton


Top
 Profile Personal album  
 
 Post subject: Re: 750 F1 Specs & Info
PostPosted: Wed May 02, 2012 5:15 am 
Offline

Joined: Thu Apr 21, 2011 4:29 am
Posts: 275
Images: 1
Update:

The Brembo part number for the clutch & front brake master cylinder cap (with bellows) is 98.5029.70 - Ducati cap # 07953970 (TAV 18 # 7 & TAV 19 # 9) and bellows # 079539682 (TAV 18 & TAV 19, # 8).


Top
 Profile Personal album  
 
 Post subject: Re: 750 F1 Specs & Info
PostPosted: Wed May 02, 2012 9:06 am 
Offline
User avatar

Joined: Sun Aug 08, 2010 4:37 pm
Posts: 360
Images: 6
Location: Ottawa, Ontario, The Great White North
I've got a used battery rubber kicking around somewhere and you're welcome to it - zip an email off to me and we'll set something up..

Regards,

_________________
Steve Munro
loudbike
http://www.loudbike.com
http://www.vintagemotorcyclesforsale.com


Top
 Profile Personal album  
 
 Post subject: Re: 750 F1 Specs & Info
PostPosted: Tue May 08, 2012 9:30 pm 
Offline

Joined: Thu Apr 21, 2011 4:29 am
Posts: 275
Images: 1
Thanks for the offer Steve, but Ian Gowanloch ended up finding me a new one that he had stashed away.

On another note, can anyone get me photo of how the iginition switch is mounted? Mine has a pair of special bolts (maybe pillars?) and I believe there should be a pair of spacers as well? If anyone can give me the OD & length of the spacers it would be appreciated. The parts book just shows normal capscrew bolts with the mounting the wrong way around.

Also, my clipons had a pair of domed head bolts mounting them (at least one did). From looking through all my photos of other bikes it would appear that these were correct, but the parts book lists the same bolt as used in the lower triple pinch bolt which cant be correct as the former is only 6mm whilst the latter is 8mm. Does anyone know of a part number for these?


Top
 Profile Personal album  
 
 Post subject: Re: 750 F1 Specs & Info
PostPosted: Wed May 09, 2012 8:57 am 
Offline

Joined: Thu Apr 21, 2011 4:29 am
Posts: 275
Images: 1
Another update:

The o-ring size for the oil cooler mounting (P/N 072448390, TAV 15 item # 3) is 109.6 x 5.7mm NBR-70


Top
 Profile Personal album  
 
 Post subject: Re: 750 F1 Specs & Info
PostPosted: Wed May 09, 2012 9:14 am 
Offline

Joined: Thu Apr 21, 2011 4:29 am
Posts: 275
Images: 1
I thought I'd start a hardware cross reference list whilst I'm re-assembling the bike - I'll update this as I go. A couple of abbreviations:

AHCS = Allen Head Capscrew
CAH = Countersunk Allen Head
HH = Hex Head

P/N 015092050 - 6mm x 30mm (AHCS)
P/N 040029110 - 6mm x 1.0mm x 35mm (AHCS)
P/N 040049030 - 6mm x 1.0mm x 10 mm (CAH)
P/N 040049050 - 6mm x 1.0mm x 50mm (AHCS)
P/N 60N101148 - 8mm x 1.5mm x 40mm (HH)
P/N 60N102482 - 5mm x 10mm (AHCS)
P/N 60N102504 - 6mm x 10MM (AHCS)
P/N 60N102555 - 8mm x 20mm (AHCS)
P/N 60N107350 - 8mm x 1.5mm x 16mm (AHCS)
P/N 707010N01 - 10mm x 1.5mm x 30 mm (AHCS); special head = 7mm thick
P/N 715021312 - 5mm x 25mm (AHCS)
P/N 715021624 - 6mm x 16mm (AHCS)
P/N 715021631 - 6mm x 20mm (AHCS)
P/N 734008N01 - 8mm Spring Washer
P/N 734010N01 - 10mm Spring Washer
P/N 734310N01 - 10mm Flat Washer
P/N 77150678B - 6mm x 1.0mm x 20mm (AHCS)

P/N 067077070 - 8mm Flat Washer


P/N 715022156 - 8mm x 1.5mm x 70mm (AHCS)
P/N 715022158 - 8mm x 1.5mm x 80mm (AHCS)
P/N 7150


Last edited by Sumfun4me on Wed May 15, 2013 5:45 am, edited 2 times in total.

Top
 Profile Personal album  
 
 Post subject: Re: 750 F1 Specs & Info
PostPosted: Sun Jun 24, 2012 9:33 am 
Offline

Joined: Thu Apr 21, 2011 4:29 am
Posts: 275
Images: 1
I've managed to track down a NOS voltage regulator for my project, after working out that the one fitted was in fact after market. I was wondering if anyone could tell me if the wiring harness should have a 6 pin connector fitted to mate into the regulator, or if it uses individual female spade type connectors for each pin (I hope that makes sense). The wiring schematic doesnt help, as it tends to identify each multi pin connector in the harness, but not for the regulator as such. I've attached a couple of photos of the regulator to show what I'm on about:


Attachments:
Voltage regulator 03.JPG
Voltage regulator 03.JPG [ 127.12 KiB | Viewed 547 times ]
Vp;tage Regulator 02.JPG
Vp;tage Regulator 02.JPG [ 145.95 KiB | Viewed 547 times ]
Top
 Profile Personal album  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 105 posts ]  Go to page Previous  1 ... 4, 5, 6, 7, 8, 9, 10, 11  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Bing [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Template made by DEVPPL