Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://www.ducatittandf1.com/ |
|
F1 Endurance racer bodywork http://www.ducatittandf1.com/viewtopic.php?f=24&t=1751 |
Page 1 of 1 |
Author: | Ducfan [ Tue Jan 24, 2012 1:38 am ] |
Post subject: | F1 Endurance racer bodywork |
I'm looking for F1 race fairings is there an Australian supplier? failing that Airtech in the U.S. has them,can anyone comment on the Airtech quality? |
Author: | TT1 [ Tue Jan 24, 2012 6:25 am ] |
Post subject: | Re: F1 Endurance racer bodywork |
You should try Phil at Road and Race I ordered one from him recently, it hasn't arrived yet so can't comment on quality etc. Regards Joe |
Author: | pantah_good [ Tue Jan 24, 2012 12:41 pm ] |
Post subject: | Re: F1 Endurance racer bodywork |
I like Airtech. Last winter I fitted up a complete set of their early style 851 bodywork on the ex-Adamo bike I'm rebuilding. That first style 851 bodywork is overly complicated, but all the Airtech parts fit properly, were reasonably light and were well made. I've had good luck with other parts I've gotten there too. If you contact them, ask for "Dutch", he was very good to work with. Bill |
Author: | Ducfan [ Sun Jan 29, 2012 3:07 am ] |
Post subject: | Re: F1 Endurance racer bodywork |
Thanks for the replies will look into both Joe can you post when you recieve the R&R glass and give an assesment on quality? |
Author: | teetee2 [ Mon Apr 23, 2012 8:56 am ] |
Post subject: | Re: F1 Endurance racer bodywork |
You can get them from Old Ducati Racing Spares in Italy but the postage would probably have you making them yourself. |
Author: | HarrisF1 [ Wed Apr 25, 2012 3:36 am ] |
Post subject: | Re: F1 Endurance racer bodywork |
Attachment: 2012 F1-fairing1.jpg [ 15.36 KiB | Viewed 2208 times ] Attachment: 2012 F1-fairing1.jpg [ 15.36 KiB | Viewed 2208 times ] The way I look at things is this; I prefer to pay the price for quality rather than accept the cheaper version ,which then often causes visual grief. I bought a steering-damper made by Storz Engineering in USA. Not cheap with the duty, but a really fine piece. |
Author: | athleticroman [ Wed Apr 25, 2012 8:41 am ] |
Post subject: | Re: F1 Endurance racer bodywork |
Hi Ducfan, I have this set of F1 fairings that I imported from Italy (at considerable $ expense) http://www.europlastsucci.com/ducatif1.asp for a project I have since shelved. Attachment: Europlast make the fibreglass for Carlo Leoncini's Moretti Replica you will find here on the forum: viewtopic.php?f=10&t=928&hilit=f1+fairing&start=10 If you are interested I am sure we can work out a reasonable price. Cheers, |
Author: | Carlo [ Wed Apr 25, 2012 8:54 am ] |
Post subject: | Re: F1 Endurance racer bodywork |
Hello Friends, if I can do something, I'm here. Unfortunately, in Italy everything has become very very expensive price, and shipping costs have increased tremendously. I'm a friend of EUROPLASTSUCCI. I'm here. ciao dall'italia Carlo Leoncini |
Author: | wdietz186 [ Wed Apr 25, 2012 7:29 pm ] |
Post subject: | Re: F1 Endurance racer bodywork |
I've had two sets of Airtech F1 bodywork on mine[it crashes OK but try to avoid it] and the fit and quality is very good. It is my understanding you can have them made in carbon fiber too if you want to spend the money. |
Author: | pantah_good [ Thu Apr 26, 2012 9:24 am ] |
Post subject: | Re: F1 Endurance racer bodywork |
+1 on the Airtech glass. Bill |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |