Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://www.ducatittandf1.com/ |
|
Pistons and cylinders Paso 750 http://www.ducatittandf1.com/viewtopic.php?f=24&t=179 |
Page 1 of 1 |
Author: | 750TT [ Sun May 08, 2011 12:28 pm ] |
Post subject: | Pistons and cylinders Paso 750 |
it asks... It is possible to mount cylinders and pistons of Ducati Paso 750 in a engine 650 or 750 with the back carburetors??? |
Author: | Palmer [ Mon May 09, 2011 9:53 pm ] |
Post subject: | Re: Pistons and cylinders Paso 750 |
750TT, Yah, you can use Paso or 750ss cylinders and pistons. You will need to modify the vertical cylinder cooling fin to clear the cylinder head exhaust and turn the piston 180 degrees. Palmer |
Author: | la tige [ Mon May 09, 2011 10:25 pm ] |
Post subject: | Re: Pistons and cylinders Paso 750 |
Palmer wrote: 750TT, Yah, you can use Paso or 750ss cylinders and pistons. You will need to modify the vertical cylinder cooling fin to clear the cylinder head exhaust and turn the piston 180 degrees. Palmer hello, palmer, would you please explain? |
Author: | graeme [ Tue May 10, 2011 1:43 am ] |
Post subject: | Re: Pistons and cylinders Paso 750 |
This is a 500, you can see the fins removed below the exhaust port. I used a 750 SS engine, cylinder and a 650 head, it fitted without removing fins on the cylinder, but they were oil cooled cylinders with small fins anyway. I did have to shave the fins on the 650 head to clear the SS breather. Hope this helps. graeme |
Author: | 750TT [ Tue May 10, 2011 1:52 pm ] |
Post subject: | Re: Pistons and cylinders Paso 750 |
Palmer,Graeme... thank you very much by the explanations. it already "suspected" that it would have to file some parts but it did not know clearly if mechanically he were acceptable..now I see that yes by your contributions. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |