| Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://www.ducatittandf1.com/ |
|
| F1 vs Paso - Barrels http://www.ducatittandf1.com/viewtopic.php?f=24&t=218 |
Page 1 of 1 |
| Author: | Sumfun4me [ Tue May 31, 2011 10:20 am ] |
| Post subject: | F1 vs Paso - Barrels |
Can anyone tell me if the 750 F1 & 750 Paso barrels are the same? I know both are 88mm, but are they identical otherwise? |
|
| Author: | Rick [ Tue May 31, 2011 12:43 pm ] |
| Post subject: | Re: F1 vs Paso - Barrels |
there's a small difference in the vertical cylinders, a clearance notch in the cooling fins at the exhaust port- not a big job to modify the Paso part to work. Attached a picture of the F1(front left), Paso(front right) and a mystery cylinder with both notches. Attachment: pantah cylinders.jpg [ 520.43 KiB | Viewed 1429 times ] |
|
| Author: | Sumfun4me [ Tue May 31, 2011 6:25 pm ] |
| Post subject: | Re: F1 vs Paso - Barrels |
Thanks Rick. |
|
| Author: | 618F1 [ Tue May 31, 2011 6:30 pm ] |
| Post subject: | Re: F1 vs Paso - Barrels |
I think the mystery cylinders are from after-market kits that cover both the F1 and the Paso since they both have the round hemi combustion chamber. HC pistons could be the same, and the cylinder would work on either. MikeV |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|