| Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://www.ducatittandf1.com/ |
|
| 750 F1 Engine mounting bolts. http://www.ducatittandf1.com/viewtopic.php?f=24&t=3182 |
Page 1 of 1 |
| Author: | athleticroman [ Sun Jun 17, 2012 3:47 am ] |
| Post subject: | 750 F1 Engine mounting bolts. |
Hi, Are later model engine mount bolts the same size as the 750 F1? I am wondering if bolts from a 1991 900 SuperSport will fit? Or can I use bolts from an 848? Attachment:
File comment: Engine bolts from a 1991 900 SS 91 900 SS.JPG [ 26.68 KiB | Viewed 1223 times ] OR... Attachment: 2010 Street Fighter 848.JPG [ 26.25 KiB | Viewed 1223 times ] Cheers, |
|
| Author: | graeme [ Sun Jun 17, 2012 4:00 am ] |
| Post subject: | Re: 750 F1 Engine mounting bolts. |
I used 750 SS ('95) bolts to fit that engine to Velicchi frame. Pretty sure all the 2 valve motors up to 1000 use the same bolts? |
|
| Author: | 618F1 [ Sun Jun 17, 2012 9:50 am ] |
| Post subject: | Re: 750 F1 Engine mounting bolts. |
The length is OK, but I believe the threads are different on the 750-900 bolts. Can't remember if finer or coarser. So, the one on the bottom of the engine is fine, but the one at the top that threads into the frame will not work. I doubt the 848 and even earlier superbike bolts will work. MikeV |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|