Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://www.ducatittandf1.com/ |
|
F1 engine bolt diameter and length http://www.ducatittandf1.com/viewtopic.php?f=24&t=34 |
Page 1 of 1 |
Author: | MarcFX [ Tue Oct 26, 2010 3:13 am ] |
Post subject: | F1 engine bolt diameter and length |
Does anyone have set of engine mounting bolts and can give me diameter and length .... what other models will fit thanks Marc |
Author: | Palmer [ Thu Oct 28, 2010 11:32 pm ] |
Post subject: | Re: F1 engine bolt diameter and length |
Marc, The standard F1 motor mounting bolts are: front 10 mm x 45 mm with a 1.5 pitch and the rear motor mount bolt is 10 mm x 234 mm with the 1.5 pitch. As far as other Ducatis engine bolts, I beleive they are the same through for the 1997 for all the 600-750s. In 1998 they redesigned the engine cases and went to a through bolt in the front mount. Good luck, Palmer |
Author: | MarcFX [ Mon Nov 01, 2010 3:54 am ] |
Post subject: | Re: F1 engine bolt diameter and length |
Thanks for that Palmer, that helps me out a lot. The bolts that came with the bike were pretty crusty so this gives me a base line to make some bolts that fit nicely. Thanks Marc |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |