DUCATI TT and F1 FORUM
 
It is currently Thu Mar 28, 2024 12:22 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: front sprocket later F1
PostPosted: Thu Nov 04, 2010 8:39 pm 
Offline

Joined: Wed Oct 13, 2010 10:32 pm
Posts: 99
Images: 6
Simple question can anyone tell what the later 750 F1 ( Laguna Seca ) has common front sprocket to. Maybe 851. Any thoughts on the availability of sprocket for 525 chain.

Thanks Marc


Top
 Profile Personal album  
 
 Post subject: Re: front sprocket later F1
PostPosted: Thu Nov 04, 2010 9:03 pm 
Offline

Joined: Sun Aug 08, 2010 8:03 pm
Posts: 1142
Images: 0
Hi Marc, I think the number of splines are the same but the Laguna Seca had a 520 chain with a very offset sprocket from Ducati to clear the wider tires. Hope that helps. Lou


Top
 Profile Personal album  
 
 Post subject: Re: front sprocket later F1
PostPosted: Thu Nov 04, 2010 11:59 pm 
Offline

Joined: Thu Oct 14, 2010 9:58 pm
Posts: 31
Location: Melbourne, Oz
Hi Marc, from the Afam catalogue the p/n is 52603 but I don't believe it is used on any other model. I was lucky enough to get one on ebay not that long ago. Maybe contact Afam and see if they can still supply?
Regards, Joe


Top
 Profile  
 
 Post subject: Re: front sprocket later F1
PostPosted: Fri Nov 05, 2010 8:05 am 
Offline

Joined: Mon Oct 04, 2010 7:47 am
Posts: 104
Images: 0
Marc,
If you do get one of the off-set sprockets for the Laguna Seca make sure it fits tight on the splines. I have seen several after market off-set sprockets that are slightly loose and cause wear on the shaft. For my race bike I used a sprocket off a newer monster or super sport and made a round aluminum plate an spacer to hold the sprocket further out on the output shaft, holding it all on with a bolt into the center shaft. I used two 5mm bolts to hold the plate to the sprocket and safety wired the three bolts together. This allowed me to get the same off-set as the stock Laguna Seca without the loose sprocket and worn output shaft.

Palmer


Top
 Profile Personal album  
 
 Post subject: Re: front sprocket later F1
PostPosted: Sat Nov 06, 2010 5:56 pm 
Offline
User avatar

Joined: Sun Aug 08, 2010 4:37 pm
Posts: 362
Images: 6
Location: Ottawa, Ontario, The Great White North
Hey, Marc:

if AFAM can't supply, I have those sprockets in stock - both street and race (stabilizing plate in the offset cavity) in stock.

Regards,

_________________
Steve Munro
Montreal, QC CANADA


Top
 Profile Personal album  
 
 Post subject: Re: front sprocket later F1
PostPosted: Sun Nov 07, 2010 6:25 am 
Offline

Joined: Wed Oct 13, 2010 10:32 pm
Posts: 99
Images: 6
Hi Steve,

awesome I will send you a PM. Amusing myself today fitting SV650 wheel in standard F1 swingarm... OK don't ask, anyway offet would be useful.

Best regards Marc


Top
 Profile Personal album  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Template made by DEVPPL
[ Time : 0.037s | 15 Queries | GZIP : Off ]