Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum
http://www.ducatittandf1.com/

Header pipe length
http://www.ducatittandf1.com/viewtopic.php?f=24&t=790
Page 1 of 1

Author:  Sam [ Thu Sep 29, 2011 10:55 am ]
Post subject:  Header pipe length

Hello, can someone give me the length of the header pipes for a two into one on a 750 please.Measurement taken through the centreline on the bends what dia of tube is used and also for the final outlet dia. Thanks in advance Sam.

Author:  Palmer [ Mon Oct 03, 2011 1:17 pm ]
Post subject:  Re: Header pipe length

Sam,

A little of the size factor depends on the motor build specifications. Generally 650 and stock 750 motors use an 1.5" outside diameter head pipes around 19" to 20" in length. For my 803 motor, I use 1.625" diameter and 21" length. Cams, intake manifolds, carbs, and cylinder heads all have a bearing on what would work best for your combination.

Palmer

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/