Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://www.ducatittandf1.com/ |
|
Pantah NCR frame racer project http://www.ducatittandf1.com/viewtopic.php?f=25&t=11333 |
Page 1 of 1 |
Author: | 618F1 [ Fri Apr 08, 2016 10:37 pm ] |
Post subject: | Pantah NCR frame racer project |
Call me crazy, but this one is in the wings too; an [original] NCR framed TT2 bike. Right now it will start with the well-built 650cc engine that was in the No 8 Slynn/Rutter/Wynne 1981 IOM rendition I built in 2011 (seen here as a fitting mule --- sorry Pat). And the tank/seat combo from Huit was the real clincher. I am sure it will evolve over time, but I can "see" it now; I am thinking about using that BRIGHT green on the frame and swingarm! MikeV Attachment: Attachment: Attachment: Attachment: Attachment: Attachment: Attachment: Attachment:
|
Author: | huit [ Sat Apr 09, 2016 6:48 am ] |
Post subject: | Re: Pantah NCR frame racer project |
Go Mikey!! Looks good! |
Author: | 750TT [ Sat Apr 09, 2016 9:17 am ] |
Post subject: | Re: Pantah NCR frame racer project |
anxious to see progress!! |
Author: | boucher [ Sun Apr 10, 2016 6:14 pm ] |
Post subject: | Re: Pantah NCR frame racer project |
Hi mike, you have got all the ingredients to make something nice. Are they 35mm marzocchi forks you are going to use? Boucher. |
Author: | 583 [ Mon Apr 11, 2016 12:02 am ] |
Post subject: | Re: Pantah NCR frame racer project |
Nice project! It will be a very light bike Ciao Filippo |
Author: | 618F1 [ Wed Apr 13, 2016 9:48 pm ] |
Post subject: | Re: Pantah NCR frame racer project |
Hello Boucher. They are 38mm; problem is they are for 4-puck 40-mm calipers on 300mm rotors 120mm on center. That is a bit of a problem using the older wheels and vintage rotors, which are much wider at the hub. So some special adapters will have to be made to use Goldline 08s. MikeV |
Author: | peterbike [ Thu Apr 14, 2016 3:54 am ] |
Post subject: | Re: Pantah NCR frame racer project |
Hey Mike, how about turning the swingarm upside down & mount the shock under the motor - like the cobas do ? ... 2 hrs later. Sorry I was wrong about the cobas, but it is still interesting. The bike I'm thinking of was a japanese bike, but I can't remember any more. The Bob Brown bike built by Rod Tingate had it, the photo's don't reveal much - but it is stunning ! I have been buying bits & pieces off Rod for years, but no idea how talented he is until 2 yrs ago when I read the story about the Keiser ? (or a name like that) gp bike built with an outboard motor. Then I saw the B.Brown bike recently. Wow, mucho respect for that guy. There is the Britten, but it would be nice to be re-producing something that was a ducati. |
Author: | 750TT [ Thu Apr 14, 2016 11:59 am ] |
Post subject: | Re: Pantah NCR frame racer project |
618F1 wrote: Hello Boucher. They are 38mm; problem is they are for 4-puck 40-mm calipers on 300mm rotors 120mm on center. That is a bit of a problem using the older wheels and vintage rotors, which are much wider at the hub. So some special adapters will have to be made to use Goldline 08s. MikeV That will not be a problem for you.. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |