Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://www.ducatittandf1.com/ |
|
Spacer http://www.ducatittandf1.com/viewtopic.php?f=25&t=11830 |
Page 1 of 1 |
Author: | flattop900 [ Thu Sep 13, 2018 3:53 pm ] |
Post subject: | Spacer |
Hello... I am installing a new set of straight cut primary gears into a 600TL engine. What I need to know is the thickness of the spacer that goes onto the main shaft before the pressure plate. All of the parts manuals give the size for the one that goes on before the basket and gear, (5mm) but no reference to the one in question. Regards.... Flattop |
Author: | 583 [ Fri Sep 14, 2018 11:01 am ] |
Post subject: | Re: Spacer |
Hi Flattop what an interesting topic! https://www.ducatimeccanica.com/cagiva_ ... laz_06.htm Please for the 5mm spacer you mean the n°28 on the above link? and which is the number of the spacer you are asking for? ciao Filippo |
Author: | 618F1 [ Fri Sep 14, 2018 3:28 pm ] |
Post subject: | Re: Spacer |
A bit pressed for time right now, but it is the same washer that goes with #29, found between the two bearings in the basket hub. About 2.0mm thick. As long as the bottom pressure plate clears the basket (I have seen them shoved right to the metal there, and then the plate can't spin) you will be OK. MikeV CORRECTION. Meant it is the washer in the #31 on the schematic. About 1.5 to 2.0mm thick, with correct ID. It is in all the primary gears. MikeV |
Author: | 583 [ Sat Sep 15, 2018 6:57 am ] |
Post subject: | Re: Spacer |
Hi Flattop I checked on a spare Alazzurra 350 clutch I have, but the shaver you need is missing on that clutch. I'm sorry. I will find it when I will looking for other engine related stuff. In Italy is still hot weather, good for the beach! Ciao Filippo |
Author: | flattop900 [ Sun Sep 16, 2018 10:31 am ] |
Post subject: | Re: Spacer |
Thanks guys. Found one on the shelf, moving forward. Flattop |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |