Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://www.ducatittandf1.com/ |
|
Psycho Lives http://www.ducatittandf1.com/viewtopic.php?f=25&t=1820 |
Page 2 of 9 |
Author: | pat slinn [ Mon Apr 09, 2012 10:17 am ] |
Post subject: | Re: Psycho Lives |
Pantah-good, A'h now I see the drive chain "link mod", !. The photograph was probably taken in the early hours, couldn't find all the link, so in good early hours workshop hours improvised !, to enable him to check clearances or the chain line, or else he would not be able to sleep until he was satisfied that all was ok,....we have all been there. |
Author: | pantah_good [ Mon Apr 09, 2012 11:50 am ] |
Post subject: | Re: Psycho Lives |
Pat - merely a weak try at some of that subtle British humor that I love so much. Boucher - what part of the world are you in anyway? I can't read those license plates!! Bill |
Author: | graeme [ Tue Apr 10, 2012 1:09 am ] |
Post subject: | Re: Psycho Lives |
Hello Chris, Will it be ready for the Bevel and Bullshit in a couple of weeks? Or will it be the TT1 ? graeme |
Author: | boucher [ Sun Sep 23, 2012 5:05 am ] | ||
Post subject: | Re: Psycho Lives | ||
Psycho making progress.
|
Author: | 618F1 [ Sun Sep 23, 2012 8:17 pm ] |
Post subject: | Re: Psycho Lives |
Looking very nice. Keep letting us see this project as it progresses. MikeV |
Author: | loudbike [ Sun Sep 23, 2012 8:51 pm ] |
Post subject: | Re: Psycho Lives |
pat slinn wrote: ...However I am most intrigued by the writing inside the right hand megaphone, what does it say ?....Pat. I think it says "Do not install baffle". Brilliant hot rod! Nice work, Boucher! |
Author: | graeme [ Sun Sep 30, 2012 5:33 am ] |
Post subject: | Re: Psycho Lives |
Hi Chris, Looking good, can't wait to see it finished. What is the swingarm from? Keep the pictures comming please. |
Author: | 618F1 [ Tue Oct 02, 2012 11:47 am ] |
Post subject: | Re: Psycho Lives |
Question: The frame now looks very much like an NCR Pantah TT version, but I think it is a revised Pantah or Cagiva. Is that right? (I went back and see you answered that before) Nice beefy tabs for the engine mounting; did you move them from the original place for any reason? Also, did you change mufflers or did you add some form of baffling and end caps? MikeV |
Author: | boucher [ Wed Oct 03, 2012 4:36 am ] |
Post subject: | Re: Psycho Lives |
Graeme, swingarm off a st2. I used 2 left sides of the same type to get the kick out around the rim. The right side is a lot flatter bend. Made a jig cut and clamped it then tig/mig back together with through pipe and gussets also shock mounts. Mike the engine mounts are in the same spot as old flat plate originals. The megaphones are the same pipes with some baffles. [road registered???] Boucher. |
Page 2 of 9 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |