Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://www.ducatittandf1.com/ |
|
new project http://www.ducatittandf1.com/viewtopic.php?f=25&t=4877 |
Page 1 of 10 |
Author: | Dick le Dog [ Mon Sep 17, 2012 3:45 am ] |
Post subject: | Re: new project |
Very interesting : bon courage ! Dick |
Author: | huit [ Mon Sep 17, 2012 4:20 pm ] |
Post subject: | Re: new project |
Thanks Dick, it will help pass the winter months! When I purchsed it I was told it was a racebike at one time, then converted back to the street, the bore was 90mm and it had ncr#7 cams and 40mm flatslides so i decided it was worth making it into a project. paul |
Author: | huit [ Sun Oct 07, 2012 11:14 am ] | ||
Post subject: | Re: new project | ||
Finally had some time to get a little more done on the frame mod, to take the rising rate monster swingarm. Progress is slow, but I will get there, heads are back from getting new guides seats and reshaping the combustion chamber Found a really good used tig welder that I can use at home! Paul
|
Author: | 618F1 [ Wed Oct 10, 2012 11:07 am ] |
Post subject: | Re: new project |
Thanks for starting this project post, Paul. We can now watch you and Boucher create some unique Pantahs. MikeV |
Author: | huit [ Wed Oct 10, 2012 8:11 pm ] |
Post subject: | Re: new project |
Mike, I hold you responsible!!! I had a pantah racebike, and I wished it would have looked your's.... so now I will try and make some thing just a little different. My original plan was to use twin shocks, but I had some stuff lying around the shop that needed a place to go. I am still not sure what front end to use, I have a set of sportclassic forks but I am not sure of what I will end up with. There are a lot of great thing going on here(this forum) Thanks for the encouragement. Paul |
Author: | huit [ Sun Oct 21, 2012 7:15 pm ] | ||
Post subject: | Re: new project | ||
Not much time to do things the past few weeks, work keeps getting in the way! The heads are ready to be installed, hopefully that is my job this week.
|
Author: | 618F1 [ Thu Nov 08, 2012 12:52 pm ] |
Post subject: | Re: new project |
Now I see the black tape holding the frame tubes on! Are those the race heads you mentioned? What cams are in them? We need an update Paul. MikeV |
Author: | huit [ Thu Nov 08, 2012 9:40 pm ] | ||
Post subject: | Re: new project | ||
Mike the cams are ncr#7s, should be a fun little bike when done. I finally got some welding done, just have the peg hangers to do plus any other add ons once I fit most of the gear back on. Haven't decided what front end to use, upside down or conventional. I should be finished work in about 3 weeks so I can build the seat and tank units, taps and caps have been ordered and should be here next week.
|
Author: | huit [ Thu Nov 15, 2012 10:45 pm ] | ||
Post subject: | Re: new project | ||
Starting to come together! My welding is not the greatest yet, but it strong!
|
Page 1 of 10 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |