Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://www.ducatittandf1.com/ |
|
Phil Aynsley / 1984 995 Leoni http://www.ducatittandf1.com/viewtopic.php?f=26&t=11612 |
Page 1 of 2 |
Author: | pantah_good [ Sat Jul 22, 2017 5:44 pm ] |
Post subject: | Phil Aynsley / 1984 995 Leoni |
http://www.philaphoto.com/imageLibrary/thumbnails.php?album=1798 |
Author: | 618F1 [ Sat Jul 22, 2017 9:51 pm ] |
Post subject: | Re: Phil Aynsley / 1984 995 Leoni |
Right now, for sale on ebay, there is an original race poster of that bike with Adamo on it. MikeV |
Author: | boucher [ Sun Jul 23, 2017 4:03 am ] |
Post subject: | Re: Phil Aynsley / 1984 995 Leoni |
The bevel with the "don't mess with me stance" I love it! Boucher. |
Author: | ducttf1 [ Sun Jul 23, 2017 11:16 am ] | ||
Post subject: | Re: Phil Aynsley / 1984 995 Leoni | ||
I think a lot of the small teams just kept upgrading and changing the same bike. It made you think they had a bunch. I found this out working on a lot of the team Leoni bikes. Pat will tell you he had only two TT bikes if I remember correctly, but as I have been researching them I see at least three different gas tanks! I spent plenty of time with this bevel in the pictures and was lucky enough to help in some of the restoration. The airshock in the picture is deflated. If you look closely you can see someone put some rubber hose and clamps on the shock shaft to keep it up, just not enough so the ride height looks funny. A little shot of nitrogen would pick her right up. Lou
|
Author: | 618F1 [ Sun Jul 23, 2017 11:48 am ] |
Post subject: | Re: Phil Aynsley / 1984 995 Leoni |
2013 New Hampshire event Attachment: Attachment:
|
Author: | pantah_good [ Sun Jul 23, 2017 6:52 pm ] |
Post subject: | Re: Phil Aynsley / 1984 995 Leoni |
Has anyone weighed it in its final form? |
Author: | ducttf1 [ Sun Jul 23, 2017 7:02 pm ] |
Post subject: | Re: Phil Aynsley / 1984 995 Leoni |
Great question Bill. Not that I know of, but as bevels go, this thing must be one of the lightest. The wheels, frame, shock, swingarm, are the lightest parts of the era. Not much to her. Lou |
Author: | CrankyRoller [ Mon Jul 24, 2017 7:33 am ] |
Post subject: | Re: Phil Aynsley / 1984 995 Leoni |
I guess I should chime in here. Motor is not mille cases as described but 900 version. The size is 1010.8 CC (93 mm pistons) but maybe advertised differently due to regulations? The valve sizes are 47 and 40. Ill try to post some pics of the inner working. -Cranky- |
Author: | Eldert [ Tue Jul 25, 2017 11:30 am ] |
Post subject: | Re: Phil Aynsley / 1984 995 Leoni |
Attachment: found this drawing of a Leoni cilinderhead on the internet a while ago .
|
Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |