|
View unanswered posts | View active topics
Author |
Message |
pantah_good
|
Post subject: Re: Hailwood with F1 wheels & Forks Posted: Fri Jan 06, 2012 11:26 am |
|
Joined: Fri Oct 15, 2010 12:20 pm Posts: 1275 Location: Vermont, USA
|
That MHR does look nicely set up. Are those Astralite wheels 17's? Bill
|
|
Top |
|
|
ozzy909
|
Post subject: Re: Hailwood with F1 wheels & Forks Posted: Fri Jan 06, 2012 12:04 pm |
|
Joined: Sun Aug 21, 2011 10:14 pm Posts: 59
|
Hi Mike, My home is Down Under but Im based in China at the moment. The building is Michaels Motorcycles in the US where I purchased the bike over eBay in April last year. The bike came from Texas (plates), if you know any of its history I would be very interested. I like the MHR you posted, got me thinking again...what bike should I put all the goodies I bought for the F1 (17 Technos / M1R / 300mm discs / 4 pot calipers)
|
|
Top |
|
|
pantah_good
|
Post subject: Re: Hailwood with F1 wheels & Forks Posted: Fri Jan 06, 2012 2:18 pm |
|
Joined: Fri Oct 15, 2010 12:20 pm Posts: 1275 Location: Vermont, USA
|
Those sound like good TT parts. Was Michaels in St. Louis? Bill
|
|
Top |
|
|
ozzy909
|
Post subject: Re: Hailwood with F1 wheels & Forks Posted: Sat Jan 07, 2012 5:54 am |
|
Joined: Sun Aug 21, 2011 10:14 pm Posts: 59
|
pantah_good wrote: Those sound like good TT parts. Was Michaels in St. Louis? Bill Yes thats the place, they sell a lot of classic bikes. yes the parts are to convert my F1 into more of a TT style a bit like the loudbike but mainly Sunday hills runs and track days maybe a BEARS race, I have an alloy swingarm as well.
|
|
Top |
|
|
ozzy909
|
Post subject: Re: Hailwood with F1 wheels & Forks Posted: Sun Jan 08, 2012 5:53 am |
|
Joined: Sun Aug 21, 2011 10:14 pm Posts: 59
|
This is what I thought it would look like putting the oscams on the MHR. I would paint the rims the Campo Gold Colour instead of Red. I have now secured a front 18" rim off a cagiva so we have a set!
Attachments: |
dukeproject.jpg [ 100.65 KiB | Viewed 2972 times ]
|
|
|
Top |
|
|
pantah_good
|
Post subject: Re: Hailwood with F1 wheels & Forks Posted: Sun Jan 08, 2012 3:53 pm |
|
Joined: Fri Oct 15, 2010 12:20 pm Posts: 1275 Location: Vermont, USA
|
Hi Ozzy, I'll throw out for you a few experiences from my 1980 900ss 10 year so far "make it enjoyable to ride" project. Early on, Bruce Meyers (BCM) went thru and set up the stock forks. We used Gold Valves, but Bruce did some of his magic on them. On the rear I mounted good 13" YSS shocks. At that point the suspension was fine, maybe just not great. A little later I adapted a light weight set of 18" x 2.5" and 3.5" Marvic 3-spoke Pantah mag. wheels with the F1 style 280 rotors all around. This dropped the un-sprung weight considerably, and there was a very noticeable improvement in the suspension. Much more pleasant to ride, and I think those are the ideal size wheels/tires for a big ol' bevel. After a season or so, I became more and more concerned about the safety of those old mag wheels getting beat up by the crappy northern New England pavement here, and put the stock (heavy) cast wheels back on. For my bike, a good compromise solution will be to build a set of 6-rotor bolt hub wire wheels, which I love anyway. The 916 style brake calipers (with Ferodo Platinum pads) and master cylinder is a big improvement in braking feel and modulation. Just have to remember that there is enough stopping power with that set up to easily overcome the available traction of a bias 18" front tire. So, I found that properly set up Marzocchi forks work just fine on these bikes when combined with light weight wheels. I think you will enjoy your bevel project. They're a ride like nothing else, and you'll never lack for something to do. Bill
Attachments: |
Spring_08 018.jpg [ 3.45 MiB | Viewed 2949 times ]
|
|
|
Top |
|
|
ozzy909
|
Post subject: Re: Hailwood with F1 wheels & Forks Posted: Mon Jan 09, 2012 11:11 am |
|
Joined: Sun Aug 21, 2011 10:14 pm Posts: 59
|
pantah_good wrote: Hi Ozzy, I'll throw out for you a few experiences from my 1980 900ss 10 year so far "make it enjoyable to ride" project. Early on, Bruce Meyers (BCM) went thru and set up the stock forks. We used Gold Valves, but Bruce did some of his magic on them. On the rear I mounted good 13" YSS shocks. At that point the suspension was fine, maybe just not great. A little later I adapted a light weight set of 18" x 2.5" and 3.5" Marvic 3-spoke Pantah mag. wheels with the F1 style 280 rotors all around. This dropped the un-sprung weight considerably, and there was a very noticeable improvement in the suspension. Much more pleasant to ride, and I think those are the ideal size wheels/tires for a big ol' bevel. After a season or so, I became more and more concerned about the safety of those old mag wheels getting beat up by the crappy northern New England pavement here, and put the stock (heavy) cast wheels back on. For my bike, a good compromise solution will be to build a set of 6-rotor bolt hub wire wheels, which I love anyway. The 916 style brake calipers (with Ferodo Platinum pads) and master cylinder is a big improvement in braking feel and modulation. Just have to remember that there is enough stopping power with that set up to easily overcome the available traction of a bias 18" front tire. So, I found that properly set up Marzocchi forks work just fine on these bikes when combined with light weight wheels. I think you will enjoy your bevel project. They're a ride like nothing else, and you'll never lack for something to do. Bill Thanks Bill, brilliant to read your story appreciate that. I love those black SS beautiful bike, the wheels look great. I like spoke rims as well but I guess its an SS look rather than a MHR. I agree about unsprung weight, I put a set of carbon rims on my 1098 and it made such a difference it made it feel like a smaller bike. There are some NCR Rear Shocks on eBay at the moment that have been rebuilt, it looks like the reserve is high I am at over $500 and still not on the money, which would get me a new set of YSS items. Do you think the NCR's would be worth pursuing, very period trick items, but in the scheme of things the YSS may work better for less. My forks have the front facing calipers, so I was thinking about the NOS M1R 41.7mm set I have for the F1 and maybe they could work on the Hailwood allowing rear facing calipers with 40mm set up. All I need is some seals for the Forcellis and I could rebuild them for the F1 and use 65-40mm converters. Wheels??? worried about my boat anchors (Oscams)now as they only take me from 2.5 to 3 on the back so get a bit of widsth but maybe add some unwanted weight, need to search for a 18" lighter weight options in the 2.5 & 3.5 sizes, still got your Marvics?. Haha
|
|
Top |
|
|
pantah_good
|
Post subject: Re: Hailwood with F1 wheels & Forks Posted: Mon Jan 09, 2012 11:37 am |
|
Joined: Fri Oct 15, 2010 12:20 pm Posts: 1275 Location: Vermont, USA
|
All I did was switch the fork legs side to side, a fairly common practice in the day. Don't know about the NCR shocks. Sorry, the Marvics have been traded to Bruce. Bill
|
|
Top |
|
|
ozzy909
|
Post subject: Re: Hailwood with F1 wheels & Forks Posted: Mon Jan 09, 2012 12:14 pm |
|
Joined: Sun Aug 21, 2011 10:14 pm Posts: 59
|
pantah_good wrote: All I did was switch the fork legs side to side, a fairly common practice in the day. Don't know about the NCR shocks. Sorry, the Marvics have been traded to Bruce. Bill Why didnt I think of that, ok sounds like a good place to start with the stock front swapped over and rebuilt and some YSS shocks at the back, thanks again Bill.
|
|
Top |
|
|
Who is online |
Users browsing this forum: No registered users and 23 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|
|