|
View unanswered posts | View active topics
|
Page 1 of 1
|
[ 9 posts ] |
|
Author |
Message |
SLL137
|
Post subject: My Mille Posted: Fri Jul 29, 2011 8:02 am |
|
Joined: Fri Jul 29, 2011 7:10 am Posts: 15 Images: 0
|
Hi guys Here's a link to a photo of my race bike. http://www.italian-motorbikes.com/le%20 ... del-82.gifIt's got an original DASPA frame with a Mille engine that has Pantah heads grafted onto it, 41mm Dellortos, 1979 TT bodywork & fairing, Marzocchi forks from a Bimota, and Suzuki RGV wheels brakes & swingarm. It weighs 162 kgs and goes well. My next project is going to be based on a roundcase Sport replica with Sport Classic wheels and 50 mm right way up Paoli forks from a Bimota YB11. It will be great. I hope. Stephen Albury Australia
|
|
Top |
|
![](images/spacer.gif) |
ducttf1
|
Post subject: Re: My Mille Posted: Sun Jul 31, 2011 12:41 am |
|
Joined: Sun Aug 08, 2010 8:03 pm Posts: 1158 Images: 0
|
Hi Stephen, what a cool machine! You know we need more pictures and the most important right side of the engine pictures showing your conversion. Welcome to the Forum. Best Regards, Lou
|
|
Top |
|
![](images/spacer.gif) |
618F1
|
Post subject: Re: My Mille Posted: Sun Jul 31, 2011 9:36 am |
|
Joined: Thu Oct 14, 2010 11:23 am Posts: 1812
|
I agree with Lou. We need more photos, the same size, and especially the right side. Cool. MikeV
|
|
Top |
|
![](images/spacer.gif) |
loudbike
|
Post subject: Re: My Mille Posted: Sun Jul 31, 2011 8:21 pm |
|
Joined: Sun Aug 08, 2010 4:37 pm Posts: 362 Images: 6 Location: Ottawa, Ontario, The Great White North
|
Stephen:
We're not kidding.. Photos; lot's of photos.
Thanks for posting - it looks brilliant!
_________________ Steve Munro Montreal, QC CANADA
|
|
Top |
|
![](images/spacer.gif) |
SLL137
|
Post subject: Re: My Mille Posted: Mon Aug 08, 2011 4:54 am |
|
Joined: Fri Jul 29, 2011 7:10 am Posts: 15 Images: 0
|
Hi Steve Did you get the photos I Emailed to you the other day? My appalling computer skills scuttled any attempt I had of posting them myself so I hoped you could post them on my behalf.
Thanks Stephen
|
|
Top |
|
![](images/spacer.gif) |
loudbike
|
Post subject: Re: My Mille Posted: Thu Aug 11, 2011 8:46 am |
|
Joined: Sun Aug 08, 2010 4:37 pm Posts: 362 Images: 6 Location: Ottawa, Ontario, The Great White North
|
Hi Stephen - I did, but have been scrambling to catch-up from Grattan.. Here's one of the images you sent me - attached as per the instructions I posted as a 'Sticky' this morning (very trick machine I might add).. Attachment:
mille1.jpg [ 1.48 MiB | Viewed 12986 times ]
_________________ Steve Munro Montreal, QC CANADA
|
|
Top |
|
![](images/spacer.gif) |
graeme
|
Post subject: Re: My Mille Posted: Thu Aug 11, 2011 9:55 pm |
|
Joined: Sun Nov 07, 2010 10:54 pm Posts: 537 Location: Brisbane
|
Hello Stephen, What cams did you use? The Pantah heads would spin the cam the opposite direction than a bevel? (or am I wrong?) So using Pantah cams the ramps on the lobes would be rotating the wrong direction? Maybe using the cams from a late belt rear head and turning them around would get the lobes the right way? graeme
|
|
Top |
|
![](images/spacer.gif) |
graeme
|
Post subject: Re: My Mille Posted: Thu Aug 11, 2011 11:07 pm |
|
Joined: Sun Nov 07, 2010 10:54 pm Posts: 537 Location: Brisbane
|
Just found out how it's done, I think? Long cam shaft and have the bevel gear out board of the verticle bevel= the cam runs the opposite direction to a bevel cam? Thus the boxes on the bevel covers.??? Nice bike. graeme
|
|
Top |
|
![](images/spacer.gif) |
SLL137
|
Post subject: Re: My Mille Posted: Mon Aug 15, 2011 6:41 am |
|
Joined: Fri Jul 29, 2011 7:10 am Posts: 15 Images: 0
|
Hi Graeme You are absolutely correct. The cylindrical extensions on the bevel covers house an outrigger bearing that's mounted in them to support the bevel gear that sits outside the vertical tower. In that way the head and bottom end work with each other - because as you suggest the bevel & Pantah engines spin oppsite to eachother. I can't take any credit for it though, as the engineering was done by Pete Smith from a firm called Epicycle on behalf of a shop in Sydney called Saftune in the mid to late 80's. I raced the bike for a very short time in the early 90's then bought it from the estate of Mike Saffell who ran Saftune. He passed away in about 1994, and Ian Gowanloch put it back together for me. It has a 900 close ratio gearbox, the Sassi dry clutch, Hi Comp pistons, steepened valve angle in the heads, big valves and (I think) F1 cams. I've left the charging system on it because I got caught once with a battery that went flat at the worst possible time during a race - very embarrassing. It doesn't really meet any class guidelines anymore with the upside down forks and 4 piston calipers, but I don't care. I like it like it is. And it sounds like a bevel but revs like a big Pantah... Stephen
|
|
Top |
|
![](images/spacer.gif) |
|
Page 1 of 1
|
[ 9 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 31 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|
|