DUCATI TT and F1 FORUM
 
It is currently Thu Mar 28, 2024 1:52 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: rim size
PostPosted: Sat Dec 18, 2010 7:06 pm 
Offline

Joined: Thu Oct 14, 2010 5:29 am
Posts: 5
Location: adelaide , australia
hi all
i am building a bevel race bike and was unsure on what size rims i should use
i was thinking of 2.5x18front and 3.5x18rear does anyone know if this is a good
setup [ you can get the rear in a 4.0x18 ]

thanks for your help

cheers
shane


Top
 Profile  
 
 Post subject: Re: rim size
PostPosted: Sun Dec 19, 2010 8:11 am 
Offline

Joined: Fri Oct 15, 2010 5:28 am
Posts: 52
Images: 85
Location: Amsterdam
Hello shane,

If you read this website from Avon, you can seen what rim size fits with which tire size:

http://www.avonracing.com/club_page.aspx

Groet remco

_________________
"Racing is life. Anything before or after is just waiting"
http://www.motortoer.com


Top
 Profile Personal album  
 
 Post subject: Re: rim size
PostPosted: Sun Dec 19, 2010 10:30 am 
Offline
User avatar

Joined: Sun Aug 08, 2010 4:37 pm
Posts: 362
Images: 6
Location: Ottawa, Ontario, The Great White North
Hey, Shane:

I ran a 3.00 rear and 2.5 front on my bevel racer, but a 3.50 rear (illegal for P2 up here) would work fine as well. Although I haven't had any experience, I'd think that anything over 3.50 would slow down the steering response too much.

Seasons Greetings!

_________________
Steve Munro
Montreal, QC CANADA


Top
 Profile Personal album  
 
 Post subject: Re: rim size
PostPosted: Sun Dec 19, 2010 10:37 am 
Offline

Joined: Fri Oct 15, 2010 12:20 pm
Posts: 1275
Location: Vermont, USA
Hi Shane,
Does your vintage race group specify max rim widths for the class you'd be in? I'm guessing 2.5 and 3.5 would be the limit, if there is one. For what its worth, on my '80 900ss street bike a couple years ago, I fit up a set of 18" Pantah 3-spoke Marvics in 2.5 and 3.5 widths, and thought they were the perfect size for that bike. Maybe I thought they were so good because they were so much lighter than the stock wheels and helped the suspension work better, but I also really liked the way it steered with Metzelers sized for those rims (also has 13.5" shocks). I finally decided to go back to the stock slugs because the Vermont/New England pavement is so rough, I was afraid that old magnesium might brake. Miss them though. Good luck with your project, bevels are fun - in their own weird way.
Bill


Top
 Profile  
 
 Post subject: Re: rim size
PostPosted: Sun Dec 19, 2010 2:13 pm 
Offline

Joined: Thu Oct 14, 2010 7:30 am
Posts: 173
I've got 2.5/3.5 Dymags on my 900SS[77] and had no problems when I was racing it. The only downside was finding suitable tires as 18" race rubber wasn't too easy to find when I last raced it in anger[10yrs. ago!].
Unless you shorten the wheelbase I would think wider tires/rims would amplify the already trucklike qualities inherent in the bevel chassis.I don't have any experience with the Avon race tires but I understand they are real good.It is a shame the old Goodyear 1996/1734 slicks aren't around anymore, they were tires you could get away with just about anything on!


Top
 Profile  
 
 Post subject: Bill's Marvics
PostPosted: Tue Dec 21, 2010 1:40 pm 
Offline

Joined: Wed Nov 17, 2010 5:43 pm
Posts: 60
Images: 1
Bill,

Did you get those Marvics from me about 4-5 years ago? I originally got those from Adamo years ago. From the WABAC machiine.


Geoff, in Oregon.


Top
 Profile Personal album  
 
 Post subject: Re: rim size
PostPosted: Wed Dec 22, 2010 1:21 pm 
Offline

Joined: Fri Oct 15, 2010 12:20 pm
Posts: 1275
Location: Vermont, USA
Hi Geoff,
Yes it's me. I was wondering if that was you when I was looking at your F1 picture. Hated to take them off the bevel, but the pavement is rotten around here. Bruce Meyers now has them, they helped pay for rebuilding the Alazzurra engine that's in my TT. Your F1 looks like a really fun ride - very nice!
Bill


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Template made by DEVPPL
[ Time : 0.036s | 15 Queries | GZIP : Off ]