Ducati TT1, Ducati TT2 and Ducati 750 F1 Forum http://www.ducatittandf1.com/ |
|
If Spaggiari rode a Pantah... http://www.ducatittandf1.com/viewtopic.php?f=27&t=12144 |
Page 3 of 5 |
Author: | 583 [ Sat Oct 22, 2022 5:16 am ] |
Post subject: | Re: If Spaggiari rode a Pantah... |
Hi Mike Very good built I love the seat and tank setting. I have a question for you Do you you install a full kokusan ignition system? I can recognize the black coils look like the modern one as Monster or ss. Keep following your buiĺt Filippo |
Author: | 618F1 [ Sat Oct 22, 2022 9:56 am ] |
Post subject: | Re: If Spaggiari rode a Pantah... |
Yes Filippo, all Kokusan. If you look just behind the coils you will see the connections to the igniter boxes. All stock 5 ohm. And using the light steel 600ss stock flywheel. Also got rid of that clunky aluminum plate holding everything. Easy to see, easy to work on now. I will add closer photos of that later. MikeV |
Author: | 618F1 [ Sun Oct 23, 2022 12:05 pm ] |
Post subject: | Re: If Spaggiari rode a Pantah... |
Attachment: Attachment: Couple of closeups. You cannot use a Bosch-style flywheel because the timing bump placement is about 7mm different; cannot remember if it advances or retards, but does not work. The flywheel here is a mid-90s 600ss. Everything plops right onto the crankshaft. Once you have the parts this is easy. MikeV |
Author: | 583 [ Fri Oct 28, 2022 5:46 am ] |
Post subject: | Re: If Spaggiari rode a Pantah... |
Hi MikeV Thanks for the close shots Look to be a neat job on the coil area , also good for same further "fresh" air flow on vertical cilinder. I installed kokusan on my track bike and it work good on track . I have a full system , included flywhheel from a 350ss i'm planning to install on a daily use Alazzurra..on a far future. Ciao Filippo |
Author: | 618F1 [ Mon Nov 14, 2022 11:40 pm ] |
Post subject: | Re: If Spaggiari rode a Pantah... |
Made good progress. But the rain and cold has arrived. So bodywork and painting will now be delayed till spring. And I want to work on the track bikes for a while. MikeV Attachment: Attachment: Attachment: Attachment: Attachment: Attachment: Attachment:
|
Author: | huit [ Tue Nov 15, 2022 6:31 pm ] |
Post subject: | Re: If Spaggiari rode a Pantah... |
Looking good Mike! Is that tank for a bevel? Paul |
Author: | 618F1 [ Tue Nov 15, 2022 9:29 pm ] |
Post subject: | Re: If Spaggiari rode a Pantah... |
It is a bevel design, but the underside is specific to the flat two-rail Pantah frame. MikeV Till Spring! Attachment: Attachment:
|
Author: | 618F1 [ Thu Apr 06, 2023 8:04 pm ] |
Post subject: | Re: If Spaggiari rode a Pantah... |
Well, everything but the charging system is working. Only getting 12.8V. What’s new? So, if it ever stops raining and hailing and snowing and… here, I can paint the bodywork and press on. Will deal with the problem later. Yes Lou, I have grounded the hell out of everything related to the charging system! MikeV Attachment: Attachment:
|
Author: | Carlo [ Fri Apr 07, 2023 9:55 am ] |
Post subject: | Re: If Spaggiari rode a Pantah... |
Great job, in my opinion if you lower the front end a bit it will work even better! I'd love to ride that bike! Ciao! |
Author: | 618F1 [ Fri Apr 07, 2023 10:42 am ] |
Post subject: | Re: If Spaggiari rode a Pantah... |
I agree Carlo, and have been thinking about that front end. But i will wait till it has a full tank of gas and all the missing pieces, plus my butt on it, to see how it sits. Those stock 35mm forks are “soft”. MikeV |
Page 3 of 5 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |