|
View unanswered posts | View active topics
Author |
Message |
Carlo
|
Post subject: Re: Tribute to the Pantah F2 No. 8 Posted: Tue Nov 01, 2011 1:11 pm |
|
Joined: Thu Oct 28, 2010 4:44 am Posts: 1795 Images: 7
|
Let me give you a question: You can drive the motorcycle, with sandals in America? In Italy we can also drive with flip flops! We must succeed, has to ride a Ducati TT1 Lou Saif. We must find the biker suit XXXXXXXXXXL. Mr. Slinn, is a very humble person. I will put a picture, because we will not forget with whom we are talking and laughing. Mr. Slinn, is too strong! I feel very lack of friends met at Barber! Sob......Sob...... Ciao Pat, Ciao Lou Ciao a tutti!!! Sorry for my English Carlo Leoncini.
Attachments: |
slinn_foto_135.jpg [ 52.21 KiB | Viewed 3744 times ]
|
|
|
Top |
|
|
pat slinn
|
Post subject: Re: Tribute to the Pantah F2 No. 8 Posted: Tue Nov 01, 2011 3:34 pm |
|
Joined: Thu Apr 28, 2011 8:52 am Posts: 261 Images: 0
|
Carlo, your personality your character and your smile are infectious !. ( I will never forget your smile). Your presence at Ducstock added a whole dimension to the event.
The picture you posted of me with Tony Rutter was taken about half an hour before the start of the 1981 F2 race in the Isle of Man. Tony always found something for me to do to his bike just before the start. I remember very well this instance, he wanted the handlebars re-positioned, they had not been moved since he last rode it and broke the lap record. I said ok, I did nothing !, he won the race, he said everything was perfect with the bike.
Carlo, please keep making the wonderful parts that you do, keep putting them into lovely "hand made" bags, you are unique !!
Regards, Pat.
|
|
Top |
|
|
618F1
|
Post subject: Re: Tribute to the Pantah F2 No. 8 Posted: Fri Nov 04, 2011 5:44 pm |
|
Joined: Thu Oct 14, 2010 11:23 am Posts: 1826
|
Yesterday I found the source of the misfire on the No. 8 Pantah and, as I suspected, it was the Bosch ignition. But not deep inside the engine at the pickups, where I looked. It was at the ends where the wires go into the 4-gang mole connector. Cutting off three inches, removing all the old crumbling thin sheathing, and putting new pin connectors on solved the problem. Funny how a continuity test does not help show that. Fired up on the second spin, and it runs. Sounds pretty nasty too, almost as bad-ass as some of those "big old" TT1s and TT2s at the Ducfest loud bike contest, but without all the grief of that rear wheel starter. Would have been nice to fire it up there and maybe even try out the track, but at least it runs fast in my garage. Next spring awaits. MikeV
|
|
Top |
|
|
geo7863
|
Post subject: Re: Tribute to the Pantah F2 No. 8 Posted: Thu Dec 29, 2011 4:07 am |
|
Joined: Wed Apr 27, 2011 4:56 pm Posts: 79
|
Mike... what can one say.. your magnificent bike is a work of art! and to get such high praise from Pat Slinn is an honour indeed.. and well deserved I think! I wish I had some of your skill!
|
|
Top |
|
|
618F1
|
Post subject: Re: Tribute to the Pantah F2 No. 8 Posted: Thu Dec 29, 2011 8:50 pm |
|
Joined: Thu Oct 14, 2010 11:23 am Posts: 1826
|
You are kind with your comments, and Mr. Slinn was kind with his help --- and his review. Like all bikes, it looks better in the photos than in real life; the paint is probably the weakest part, and I have much to learn about that. But I am happy with it, and plan to put it on a track somewhere around here next year. It now has 38mm Dellorto flatslides, and starts on the first attempt. MikeV
|
|
Top |
|
|
geo7863
|
Post subject: Re: Tribute to the Pantah F2 No. 8 Posted: Sun Jan 01, 2012 5:28 am |
|
Joined: Wed Apr 27, 2011 4:56 pm Posts: 79
|
618F1 wrote: You are kind with your comments, and Mr. Slinn was kind with his help --- and his review. Like all bikes, it looks better in the photos than in real life; the paint is probably the weakest part, and I have much to learn about that. But I am happy with it, and plan to put it on a track somewhere around here next year. It now has 38mm Dellorto flatslides, and starts on the first attempt. MikeV Not kind Mike just true! from what I understand you have done the welding and the paintwork yourself... having never done it before... that takes a lot of trust in oneself and the balls to go ahead when disaster could be looming around the corner! I have recently built a 900SL and a 900SS from the ground up. People have applauded me for it when in reality all I did was just assemble a bunch of parts. Ok I made a few brackets and made some carbon fibre bits and pieces. But someone else did the hard work, the welding the painting the engine rebuilds! What you (and others on this here forum) have done takes true skill and I am a wee bit envious of that! I look at my bikes whith not a small amount of satisfaction... and then look at yours and feel somewhat deflated!
|
|
Top |
|
|
pantah_good
|
Post subject: Re: Tribute to the Pantah F2 No. 8 Posted: Sun Jan 01, 2012 1:00 pm |
|
Joined: Fri Oct 15, 2010 12:20 pm Posts: 1275 Location: Vermont, USA
|
Hi geo7863, I used to feel your pain, but I think I’ve come to the conclusion that life is too short to feel deflated about any skills not acquired along the way. I can’t weld, paint, or do serious engine work. My machining skills are limited to a table top drill press and bench grinder, and my track riding can best be described as slow. However, I now think of myself as a decent general contractor that really enjoys doing what I know I can do. For us amateurs, these bikes are just for having fun with, and when you have been responsible for getting yours up and running and ridden, give credit where credit is due, then stand back and fully bask in it’s glow. Bill
|
|
Top |
|
|
geo7863
|
Post subject: Re: Tribute to the Pantah F2 No. 8 Posted: Sun Jan 01, 2012 4:10 pm |
|
Joined: Wed Apr 27, 2011 4:56 pm Posts: 79
|
pantah_good wrote: Hi geo7863, I used to feel your pain, but I think I’ve come to the conclusion that life is too short to feel deflated about any skills not acquired along the way. I can’t weld, paint, or do serious engine work. My machining skills are limited to a table top drill press and bench grinder, and my track riding can best be described as slow. However, I now think of myself as a decent general contractor that really enjoys doing what I know I can do. For us amateurs, these bikes are just for having fun with, and when you have been responsible for getting yours up and running and ridden, give credit where credit is due, then stand back and fully bask in it’s glow. Bill Thanks Bill for your kind words to sweeten the pain I know we cannot all be excellent at everything, we all have strengths and weaknesses. And I am happy with what I have done... starting out wanting a respray..ending up building two bikes from scratch and now building an F1 race replica. Everyone has told me that welding for example is not that hard.... but I am too impatient... if I start welding I want to weld now and weld GOOD NOW! same as painting... its not a hard skill but time consuming and laborious with all the prep and rub-downs...just not patient enough. I can fabricate carbon fibre bits, but not mould them...I havent got the patience to learn all the ins and outs of release agents formers etc etc etc So my gripe is not that others are better than me, but that I am too lazy to do it myself However what I have done has all been great fun indeed, searching for the bits, pondering solutions to problems! I have had experts tell me something cant be done and my pigheaded stubborness comes out and I find a way to do it! Example I took a Baglux bagster tank cover for a Ducati 900SS to a saddlemaker with my F1 race tank and said 'make that fit that'.. 'cant be done' says he so I spent three weeks cutting and sewing and made it myself..ok its a bit on the scruffy side when compared to a new Baglux tank cover but I am well chuffed with it Yes its all great fun indeed regardless of that fact that others can do it better regards George
|
|
Top |
|
|
618F1
|
Post subject: Re: Tribute to the Pantah F2 No. 8 Posted: Tue Jun 05, 2012 6:12 pm |
|
Joined: Thu Oct 14, 2010 11:23 am Posts: 1826
|
|
Top |
|
|
618F1
|
Post subject: Re: Tribute to the Pantah F2 No. 8 Posted: Sun Dec 13, 2015 5:44 pm |
|
Joined: Thu Oct 14, 2010 11:23 am Posts: 1826
|
In 2015 I made more revisions to bring the bike closer to the original: built a new engine with some components, and a look, more like the 1980s; revised the front tube from the head to the front engine mount, added a more-correct bracket for the trailing arm, added some more-appropriate fairing side brackets, and, painted the frame with epoxy. During the course of doing this I gave up on the Bosch ignition and installed a 1990s-era 600 flywheel (light steel) and Kokusan components; now it starts, and runs, and I know for certain that the Lectron carbs actually work! In August I took it to a vintage bike event in Tacoma, Washington, and entered it in the competition group [while showing it as a replica]. MikeV PS: I will post some photos of other flywheels I have found in another section soon. Attachment:
004.JPG [ 3.8 MiB | Viewed 2275 times ]
Attachment:
009.JPG [ 3.8 MiB | Viewed 2275 times ]
Attachment:
010.JPG [ 3.66 MiB | Viewed 2275 times ]
Attachment:
011.JPG [ 3.37 MiB | Viewed 2275 times ]
Attachment:
011.JPG [ 3.37 MiB | Viewed 2275 times ]
Attachment:
016.JPG [ 4.14 MiB | Viewed 2275 times ]
Attachment:
019.JPG [ 4.16 MiB | Viewed 2275 times ]
Attachment:
046.JPG [ 4.43 MiB | Viewed 2275 times ]
Attachments: |
016.JPG [ 4.06 MiB | Viewed 2275 times ]
|
|
|
Top |
|
|
Who is online |
Users browsing this forum: No registered users and 6 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|
|