DUCATI TT and F1 FORUM
 
It is currently Thu Mar 28, 2024 5:40 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 120 posts ]  Go to page Previous  1, 2, 3, 4, 5 ... 12  Next
Author Message
 Post subject: Re: Ozzie Ducati TT2 Racebike Build
PostPosted: Wed Feb 08, 2012 11:58 pm 
Offline

Joined: Sun Nov 07, 2010 10:54 pm
Posts: 534
Location: Brisbane
Hello Lee,
I used a Wilbers with remote res. and adjustable length and comp and rebound.
The adjustable length come in handy setting the geometry.
Don't forget there isn't much room around the rear carb for a wide shock.
Graeme


Top
 Profile  
 
 Post subject: Re: Ozzie Ducati TT2 Racebike Build
PostPosted: Thu Feb 09, 2012 7:03 am 
Offline

Joined: Fri Nov 18, 2011 7:18 am
Posts: 117
Images: 5
Pantah, No you're more than ok mate, my measurements were with the bike on it's engine stand with both wheels off the ground, so I'm guessing it'll be around 340mm with both wheels on the ground, but I'm away riding my Ducati Monster with work buddies this weekend so I'll get back to you with more accurate numbers early next week.

Graeme, I'll take a look at the Wilbers stuff as well, I think it was Bob Garner who had a Wilbers shock in his TT2 at the Island Classic this year too.

Alright, then. A few weeks ago, my parcel arrived from Carlo Leocini, Pics below of the beautiful parts he manufactures. Very impressed, and such a nice family too!! I highly recomend his parts. I got a pair of 280mm front disc rotors and a 260mm rear, along with rear master cyl, and caliper and brackets etc...
I may well use the Front discs on my original Campy wheels and use the TZ 280mm Rotors as they're the same dia as the original ones, so I'm not at any advantage and it'll save me trying to fabricate spacers etc..
The rear disc I'll be trying to fit to my TZ250 rear wheel, possibly I'll need to make another caliper bracket as the offset will no doubt be way off, we'll see soon enough.
All the parts that I don't use just now will be saved for when I put the bike back to original spec when I'm old and gray!!! lol... :lol:
I must also apologise for the previous pics quality, (I was using my mobile phone), now I'm using a Canon 550D SLR, much better!

OK, enjoy the pics, I'm off to bed, :)
Lee.


Attachments:
IMG_2582C.jpg
IMG_2582C.jpg [ 346.16 KiB | Viewed 2033 times ]
IMG_2581C.jpg
IMG_2581C.jpg [ 386.34 KiB | Viewed 2033 times ]
IMG_2580C.jpg
IMG_2580C.jpg [ 346.86 KiB | Viewed 2033 times ]
IMG_2579C.jpg
IMG_2579C.jpg [ 296.24 KiB | Viewed 2033 times ]
IMG_2578C.jpg
IMG_2578C.jpg [ 444.38 KiB | Viewed 2033 times ]
Top
 Profile Personal album  
 
 Post subject: Re: Ozzie Ducati TT2 Racebike Build
PostPosted: Thu Feb 09, 2012 10:10 am 
Offline

Joined: Thu Oct 14, 2010 11:23 am
Posts: 1802
You went to the motorcycle jewelry store in Italy! Beautiful parts aren't they? You will be having fun with this project. MikeV


Top
 Profile  
 
 Post subject: Re: Ozzie Ducati TT2 Racebike Build
PostPosted: Fri Feb 10, 2012 4:42 pm 
Offline

Joined: Thu Oct 28, 2010 4:44 am
Posts: 1783
Images: 7
Hello guys, you're too good to us.
My wife has attacked the small jib, I chose the color of the small jib, DUCATI RED! :lol:

THANK YOU THANK YOU THANK YOU.

Carlo e Antonella.


Top
 Profile Personal album  
 
 Post subject: Re: Ozzie Ducati TT2 Racebike Build
PostPosted: Fri Feb 10, 2012 5:11 pm 
Offline

Joined: Thu Apr 28, 2011 8:52 am
Posts: 261
Images: 0
Carlo,

Your parts are beautiful, your work is helping the Euro ? and your country's hard up economy.

How are you and Antonella ?

Pat.


Top
 Profile  
 
 Post subject: Re: Ozzie Ducati TT2 Racebike Build
PostPosted: Fri Feb 10, 2012 5:59 pm 
Offline

Joined: Thu Oct 28, 2010 4:44 am
Posts: 1783
Images: 7
Hello Pat, I thank you for your compliments, you are in Italy, gritting his teeth, unfortunately to pay are always the same.

My wife and I do our job very passionately, in Italy we say that the motorcycle is not like bread, you can do without.

I do not want to complain, but I hope that what we pay for the umpteenth time, is the latest surcharge, I believe that another tax such as this, we could not bear it.

A big hello to you Pat, and your whole family.

A big hello to all friends of the FORUM.

Hello from Italy (BRRRRR!!) Carlo


Top
 Profile Personal album  
 
 Post subject: Re: Ozzie Ducati TT2 Racebike Build
PostPosted: Tue Feb 21, 2012 6:04 am 
Offline

Joined: Fri Nov 18, 2011 7:18 am
Posts: 117
Images: 5
Hello everyone,
While I'm waiting for my wheels to get painted I've started working on ordering some bolts and various fasteners, and as per the pic below I've just started to machine up the Billet Triple Clamps. I'm just putting in some pockets into the underside to try and shed some of the weight. Not that it really matters, but while I'm waiting....
Cheers,
Lee.


Attachments:
SNC00549C.jpg
SNC00549C.jpg [ 245.86 KiB | Viewed 1883 times ]
Top
 Profile Personal album  
 
 Post subject: Re: Ozzie Ducati TT2 Racebike Build
PostPosted: Sun Apr 22, 2012 12:06 am 
Offline

Joined: Fri Nov 18, 2011 7:18 am
Posts: 117
Images: 5
G'day, everyone.
OK, it's been a while since and update, so this is what I've been up to.
My Yamaha TZ250GP wheels arrived back from my painters, we went with a Metallic gold colour that we thought may well match the bike best, we finished them in a satin instead of a gloss. I think they'll be alright. I have to install the new bearings and spacers and some new rubber, then that's another job done.
While I was waiting I started to modify the triple clamps, these had a welded boss on the lowers that acted on the frames lock stops, I machined these off and turned up some cylindrical bobbins to do the same job, hopefully my calcs are right and that's all I have to do, but if not I now have the ability to increase/decrease the diameter of the bobbins to adjust the steering lock. I think it'll work out ok.
The bike came with an assortment of fasteners, some ok, some not so. So the decision was made to purchase some Pro-Bolt hex flanged bolts in titanium. Well these turned up last week, and look excellent, nice stuff.
One of the reasons to go for ti was I wanted whatever fasteners I used to stay bright over time and ti do just that, the weight saving is just a bonus! The other reason was I wanted hex flanged bolts as they're so easy to use with T wrenches (a throw back to my Motocross days), and I've got them for the front engine mounts too as this gives better clearance for the frame mounts and stops the paint getting knocked off buy sockets etc...
OK that's it for now.
Ciao, Lee


Attachments:
IMG_2897C.jpg
IMG_2897C.jpg [ 321.71 KiB | Viewed 1632 times ]
IMG_2903C.jpg
IMG_2903C.jpg [ 205.04 KiB | Viewed 1632 times ]
IMG_2911C.jpg
IMG_2911C.jpg [ 282.08 KiB | Viewed 1632 times ]
IMG_2912C.jpg
IMG_2912C.jpg [ 317.22 KiB | Viewed 1632 times ]
IMG_2913C.jpg
IMG_2913C.jpg [ 204.02 KiB | Viewed 1632 times ]
Top
 Profile Personal album  
 
 Post subject: Re: Ozzie Ducati TT2 Racebike Build
PostPosted: Sun Apr 22, 2012 5:41 am 
Offline

Joined: Thu Oct 28, 2010 4:44 am
Posts: 1783
Images: 7
Hello Lee, I am very happy with your work, you're making a very competitive bike, and as we can see, you know very well that a great bike is assembled in detail.
CONGRATULATIONS. :!:

My brake pump was fixed with two bolts of titanium! :shock:

Ciao da Firenze. Carlo :lol:


Top
 Profile Personal album  
 
 Post subject: Re: Ozzie Ducati TT2 Racebike Build
PostPosted: Tue Aug 07, 2012 8:56 am 
Offline

Joined: Fri Nov 18, 2011 7:18 am
Posts: 117
Images: 5
G'day, Everyone.
Well, I haven't forgotten you all, I've been hunting down lots of parts for my TT2 Racebike and I think it's time I fill everyone in where I'm at right now.
First off. I had planned to use the front suspension that came with the bike bike when I bought it, (It had Yamaha FZR1000 Forks with Billet Triple Clamps mated to Yamaha TZ250GP wheels and Disc rotors), Now this is a great light weight and wide wheel set, 17"x3.5 front & 17"x4.5 Rear, and this would have given me a great choice in slicks and wets too!! So I prepped all the wheels and had them blasted new bearings and two pack painted and cleaned and prepped the forks and Triples, all good to go.

When for some reason I just couldn't put it all together onto my bike as I started to fall into the trap of trying to build a better mouse trap!! :lol: And I had to have a really good think about what am I trying to build here, as I'm slowly turning into a middle aged family man building the fastest TT2 for historic racing was getting less important and building a period classic racebike that I can take to the track with the family was making more sense. So I bit the bullet and have decided to sell off the Yamaha FZR front end and TZ wheels and keep the bike as period as possible. Time will tell if this is a mistake, seriously hope not.

I managed to secure some 18" Magnesium Campagnolo Race wheels from a guy who knew another guy who knew someone else!!!! lol.. So that really got the ball rolling on trying to bring this TT2 back a period race bike. And another bonus in using the Campy wheelset is that Carlo's fantastic Disc brake rotors bolt right up!! Lovely!! :D

So, guess what turned up on my door step today? (See pics below). :)

What you should be looking at is a new pair of replica Marzocchi Magnesium 35mm forks and Triple Clamps from Sports Motorcycles. Honestly Bike Porn, no other words for it!!! :shock:

The quality is awesome, Glyn Robinson is a very talented guy with a keen eye for detail, and it shows in his work, I've just bolted the front end in tonight and it all slipped together with such ease I'm still giggling like a 14 year old schoolgirl... :D
I also found some NOS 35mm Verlicchi Clip-ons as well (Thanks Ian Gowanloch), so that fitted the bill nicely, in one night I've now got the front end sorted. Honestly you should see my grin, One very happy little Vegimite indeed!!!!

I'll post some more pics of other parts that have arrived very shortly.

And if one of the members here wants the Yamaha FZR/TZ frontend please email me and we can work out a deal.

Talk soon.

Lee.


Attachments:
20120806_190317Compressed.jpg
20120806_190317Compressed.jpg [ 213.11 KiB | Viewed 1442 times ]
20120806_191231 Compressed.jpg
20120806_191231 Compressed.jpg [ 201.48 KiB | Viewed 1442 times ]
20120807_183000 Compressed.jpg
20120807_183000 Compressed.jpg [ 199.21 KiB | Viewed 1442 times ]
20120807_183131 Compressed.jpg
20120807_183131 Compressed.jpg [ 163.54 KiB | Viewed 1442 times ]
20120807_185122 Compressed.jpg
20120807_185122 Compressed.jpg [ 192.17 KiB | Viewed 1442 times ]
20120807_185212 Compressed.jpg
20120807_185212 Compressed.jpg [ 222.57 KiB | Viewed 1442 times ]
Top
 Profile Personal album  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 120 posts ]  Go to page Previous  1, 2, 3, 4, 5 ... 12  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Template made by DEVPPL
[ Time : 0.083s | 18 Queries | GZIP : Off ]