We're delighted to be carrying some of Ducati Hall of Fame tuner Bruce Meyers' performance products for vintage Ducatis - particulary these high-quality forged pistons designed by Bruce to give the small block Ducati twins a needed boost in compression (and displacement) for competition use.
82mm Race Piston for 650cc Pantah (Alazzurra).Attachment:
Meyers Performance Vintage 82mm Hi-compression Race Piston Set - Ducati 650 Pantah Alazzurra.JPG [ 2.6 MiB | Viewed 1193 times ]
This is a drop-in (no rebalancing of the crankshaft required) piston with 13:1 compression with pockets that support 1mm oversize valves and most cams including the NCR #7 and V2. The dome has enough meat to allow the dome to be machined down to 11.5:1 if you're looking for trackday/street use.
90mm (780cc) Race Piston for Ducati 750cc (later, bathtub combustion chamber).Attachment:
Meyers Performance Vintage 90mm 780cc Race Piston Set for Ducati 750cc Supersport Monster.JPG [ 2.54 MiB | Viewed 1193 times ]
These pistons are designed to be installed in race motors by experienced tuners and offer a nice boost in power and torque through the 13.5:1 compression and increased bore. You’ll need to re-bore and re-plate your cylinders and on some combustion chambers, you’ll need to trim a bit of material from the outside of the valve pocket.
The 90mm slugs will take a 1mm oversize valve and are designed for the 900SS and V2 cams; NOT the NCR #7.
Both sets will boost torque and horsepower and come and come completed with pins, clips and nitride treated rings.
Now available on the loudbike Store
http://www.loudbikestore.com/meyers-performance-vintage-pistons-c-1284_1285.html