|
View unanswered posts | View active topics
Author |
Message |
583
|
Post subject: Re: my Pantah racer Posted: Sun Feb 28, 2016 1:29 pm |
|
Joined: Wed Aug 27, 2014 3:36 pm Posts: 337
|
Fmcd92 thank you, I had stock clamps/joke with bigger offset than the F3 one. i hope to reach more feeling in entering the turn with this clamps, than before. 618f1 thank you for your warning, i will ceck it. ciao Filippo in the picture the stock clamps
|
|
Top |
|
|
583
|
Post subject: Re: my Pantah racer Posted: Sun Feb 28, 2016 2:11 pm |
|
Joined: Wed Aug 27, 2014 3:36 pm Posts: 337
|
Ciao Ducadini i belive the off-set of the F3 is 2.5 cm, the same of 750 F1 focelle italia clamps, but i will measure it to be sure. i undestand that reducing the off set mean slower turn but in this way i move the weight forward, i find real benefit in lifting the rear ammo of 2 cm so i hope to do the same with this new clamps. i have just to try it on the track.. And no, Fmi site is unintuitive, maybe you can find same news on "Superpantah" blog and "Anima Guzzista" site . anyway i don't know about the existence of a good tread about the italian classic scene on other sites this link are about the classic scene http://www.animaguzzista.com/?cat=17http://superpantah.blogspot.it/search/l ... results=20ciao e grazie Filippo
|
|
Top |
|
|
583
|
Post subject: Re: my Pantah racer Posted: Mon Feb 29, 2016 1:39 pm |
|
Joined: Wed Aug 27, 2014 3:36 pm Posts: 337
|
Pics of my clamps. Stock clamps look to have 4/5 cm off-set while F3 clamps 2,5 cm. (almost) MikeV you was right, with F3 clamps the tubes hit the Pantah tank. Ciao Filippo [url=https://flic.kr/p/WnS3wW]
Last edited by 583 on Mon Jul 24, 2017 1:22 pm, edited 1 time in total.
|
|
Top |
|
|
583
|
Post subject: Re: my Pantah racer Posted: Thu Mar 03, 2016 6:35 am |
|
Joined: Wed Aug 27, 2014 3:36 pm Posts: 337
|
I did same spacers for prevent the new clamps to hit the thank, then Iareassembled everything. Ciao Filippo
|
|
Top |
|
|
fmcd92
|
Post subject: Re: my Pantah racer Posted: Thu Mar 03, 2016 11:03 am |
|
Joined: Sat Oct 02, 2010 12:22 pm Posts: 128
|
Ciao Filippo,
My opinion is you are doing the best choice for the track but of course you will need to also check and maybe adjust your ride height at both front and rear suspension, now. You probably well know fork offset is measured from centre of each fork tube to centre of steering stem only. I agree with you that the flat clamps you help increase weight to front wheel, think about your swingarm, you can make that longer with some work.
Please post more pictures when you have some results, very interesting!
Thanks, Francis
|
|
Top |
|
|
583
|
Post subject: Re: my Pantah racer Posted: Thu Mar 03, 2016 2:57 pm |
|
Joined: Wed Aug 27, 2014 3:36 pm Posts: 337
|
Thank you Francis! The meter on the pics I just for reference. I let the old fork high, but of course I have to try everything on track. Stretching the svingarm is a great idea that I have on mind to do one day. I will keep updated this tread.
Ciao e grazie Filippo
|
|
Top |
|
|
618F1
|
Post subject: Re: my Pantah racer Posted: Thu Mar 03, 2016 10:39 pm |
|
Joined: Thu Oct 14, 2010 11:23 am Posts: 1832
|
This is what we need to keep all interested. Thanks Phillipo. MikeV Of course, I meant Philippo! Filippo. I WILL get it right!
Last edited by 618F1 on Fri Mar 04, 2016 11:23 am, edited 1 time in total.
|
|
Top |
|
|
583
|
Post subject: Re: my Pantah racer Posted: Fri Mar 04, 2016 8:08 am |
|
Joined: Wed Aug 27, 2014 3:36 pm Posts: 337
|
Hi MikeV, thank you for replying. ciao Filippo
|
|
Top |
|
|
583
|
Post subject: Re: my Pantah racer Posted: Fri Mar 11, 2016 9:08 am |
|
Joined: Wed Aug 27, 2014 3:36 pm Posts: 337
|
Of course you know, but I was lucky to realise that Elefant 350 is equipped with 520 chain. So the same front sprocket shaft of Alazzurra/Pantah. I buy a Pbr front sprocket, , a 520 chain and from Menani a semi milled z39 sprocket then milled to fit the stock Pantah hub. Everything fit with out spacer or extra job. And I also saved 1.1 kg . Before [url=https://flic.kr/p/WYhnMc] [url=https://flic.kr/p/VG4j25] Ciao Filippo
Last edited by 583 on Mon Jul 24, 2017 1:24 pm, edited 1 time in total.
|
|
Top |
|
|
583
|
Post subject: Re: my Pantah racer Posted: Wed Mar 23, 2016 10:43 am |
|
Joined: Wed Aug 27, 2014 3:36 pm Posts: 337
|
Finally I had a track day! My feedback is very positive, the new clamps do exactly wath I expect from them. The bike enter the turn faster than before, and "close" the turn/trajectory better. And ,also, maintain the usual Pantah stability on fast turn. I'm also impressed by my k65 Heidenau 3.50 new rear tire on a 2,75 epm wheel. Better handling on the chicane. Ciao Filippo [url=https://flic.kr/p/WULcDL]
Last edited by 583 on Mon Jul 24, 2017 1:25 pm, edited 1 time in total.
|
|
Top |
|
|
Who is online |
Users browsing this forum: No registered users and 9 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|
|