Camshaft
I have Storesd apart from a used st2 944 engine.
The orizzontal camshaft is marked OHZ
I found online another st2 orizzontal camshaft marked O3i do you konw if the above two camshafts have the same characteristics or are different.?

Filippo

These the one I found online

Filippo
Maybe this link can help you sort out the cam you have.
Good luck
Paul
http://www.bikeboy.org/duccamspec.html

Thank ypu Paul
Bike boy site is always helpful, but in this case donsolve my doubt. Just confirming me the st2 camshaft are marked OHZ.
Not O3I
Filippo

Have not seen this before. Not sure where Paul’s list came from, and was not aware that any ST2 had adjustable cam cogs. But interesting it has the blue dash of paint that most ST cams have on them. I guess you could install and do comparison measurements. MikeV

Thanks Paul.

That cam with the double marking is a bit spooky. How do they compare in a simple side-by-side comparison? Everything going the same direction like an O cam?

Mike,I found that on the bike boy page.
Paul

I actually own the OHZ and i would like to buy a similar camshaft to install on my engine but i agree with you MikeV that the double mark on O3i camshaft is al ittle spooky, before to buy it i would like to be sure that the two shaft have the same caracteristics.
O3I are a "new" spare, the seller show me the box containing the camshaft labelled :" HOR camshaft st2/03 "
Filippo

Another question,
looking at Megacycle cams site , they only have a fax number , do you know the way to get in touch with this company? maybe via email?
Thank you in advance
Filippo

I decided a number of years ago that they were no longer interested in vintage Ducati camshafts. I could be wrong. I was able to buy the last modified NCR grind cams they had. But it was like pulling teeth. MikeV

Ciao Filippo, parla con Giampaolo Succi (europlast) e digli del problema del tubo del telaio che interferisce sull'alloggio del serbatoio del carburante, io non vorrei sbagliarmi, ma lui ha due tipologie di stampi serbatoio in resina, oppure con una piccola modifica interviene a tale diversità.

Hi Filippo, talk to Giampaolo Succi (europlast) and tell him about the problem of the frame tube interfering with the fuel tank housing, I don't want to be wrong, but he has two types of resin tank molds, or with a small modification he intervenes to this diversity.
Thanks for the compliments on my disc brakes, they are always nice.